Marine Steering System

Marine Hydraulic Pump Unit

We bring forth an impregnable range of complete steering Marine Hydraulic Pump Unit. of Ram Type, Rotary Vane Type. Our company is renowned to offer installation and maintenance services of the same. These systems are sturdy, durable and are highly reliable in nature. The wide range of systems offered by us include Hand Steering, Power Steering, Electro Hydraulic steering, Rudder Angle Indicators, Rudder Control Systems and VDR integrators. These systems are available in both mechanically and electronically synchronized options.

Marine Electro-Hydraulic Power Steering Unit

There are some of the following Type of Electro- Hydraulic Power Steering Unit (PSU50/PSU60/PSU70/PSU80). The new low noise, soft control, electro-hydraulic power steering unit.

• Electrical motor
• Oil pump
• Non-return valve
• Filter unit
• Counter balance
• Vacuummeter for filter control
• Pressure control manometer

Marine Steering System

Owing to our rich experience in this field, we are engaged in manufacturing and supplying a quality approved range of Steering Gear for our customers. These gears are manufactured using optimum quality raw material, which is procured from the reliable vendors of the market. Known for their shock absorbing action against vibrations and road shocks, these gears ideal for one, two or more rudders, either with electrical synchronizing of connection bar.

Power Pack PSP

Our organization brings forth for our clients an excellent range of Power Packs PSP at highly competitive prices. These products are highly appreciated by the customers for their excellent features like easy installation & operation, high performance, durability and reliability. The range of Power Packs offered is widely used in filters and hydraulic presses. We offer complete power pack with the following:

• Two PSU50 power units
• Emergency pump
• Wheel
• Starter
• Rudder control
• Double tanks
• Made for easy installation.

Marine Hydraulic Oil Pump

Marine Hydraulic oil pump, complete with mounting plate, build in flow control and safety valve. Adjustable oil flow. Drivern by V-belt from main engine. The safety valve and flow control ensure a constant speed of the rudder, regardless the speed of the main engine.Standard version for clockwise rotation.

Rudder Angle Transmitter FBH

The range of Rudder Angle Transmitters is offered by us to the clients as per their requirements. These rudder angle transmitters FBH are electronic rudder angle transmitters that are equipped with single or double signals. Moreover, no mechanical parts are present in these transmitters that have increased their demand in the market. Some of the highlights of these products are as follows:

• Shock resistance
• 45-0–45
• Longer service life
• Tough construction

Double Rudder Control

Double Rudder Control with two electrical separeted systems for electrical steering and control of up to 4 sets of hydraulic valves.

• Rudder indicator
• Test
• Switch for bridge/steering room control
• Non-follow-up control of the rudder

Digital Repeater

Digital repeater/turning indicator with 2,24" digits. The unit can operate on NMEA 0183 (RS422 or RS232), step by step 6 or 12 step/degree and syncro 360:1 input.

Additional Information:

• Item Code: DE-200

Azimuth Circle

Product Details:

In order to fulfill the ever changing demands of our clients, we have been engaged in offering a quality range of Azimuth Circle. The offered range of azimuth circles is utilized by clients for serious observations and is ideal for deep sky photography. In addition to this, the offered range azimuth circle is tested on different parameters using stringent methods, so as to ensure its compliance with the industry laid norms and standards.

Features:

• Dimensional accuracy
• Fine finish
• Durable

Additional Information:

• Item Code: 67
• Delivery Time: 2 to 3 weeks

Panorama Rudder Angle Indicator

We are instrumental in offering a quality range of Panorama Rudder Indicators to the esteemed customers. The range of Panorama Rudder Indicators comprises a moving coil system, which is equipped with 3 pointers that are mounted on a common shaft. These indicators are widely demanded in the market for their genuine quality,longer service life and efficient performance. Our range of products is extensively used to indicate the rudder position on bridges.

Digital Rudder Angle Indicator

Digital Rudder Angle Indicator with colour display. Showing angle both analog and digital. There is no mechanical parts which means a very high schock resistance. Can also be delivered as course repeater.

Pump Motor Starter

Motor starter for electro-hydraulic pump units. Complete with amp meter and emergency stop with some following quallies.

• Start/stop
• Test
• Phase/power failure
• Low oil
• Overload

Full Follow Up

Our organization is counted amongst the most distinguished names in offering an unparalleled range of Full Follow Up. The offered range is available in various forms, sizes and patterns with respect to the diverse requirements of the clients. Along with this, the offered range is known for its superb finish, longer service life, robustness and precision engineering. Sourced from reliable vendors, these full follow ups are required by industries for its stable and controlled operation.

Joystick Controller

We are instrumental in offering a quality-assured range of Joystick Controllers STS96 to the esteemed customers. These Joystick Controllers are equipped with a push button that is used for activating the steering position. A team of experts understands the clients' expectations and manufactures these products accordingly to attain their maximum level of satisfaction. Following are the features of these products:

• Longer service life
• Easy operations
• Compact design

Repeater

• Bearing repeater on column.
• Facilities for Azimuth.
• Operates on NMEA 0183 (RS422 or RS232), step by step.
• 6 or 12 step/degree.

Additional Information:

• Item Code: BRC-250

Rudder Angle Indicator

We are engaged in offering a wide range of high performing Rudder Angle Indicators. These indicators are a device, which can be electromechanical or electrical. The indicators offered help in displaying rudder angle of the ship.

Operate in real time, these indicators display the rudders position in degrees relative a zero state. In order to ensure their accuracy and reliable performance, these indicators are widely demanded and appreciated by the clients.

Marine Watch Alarm

Our esteemed patrons can avail from us an excellent range of Marine Watch Alarms at highly competitive prices. The range of Marine Watch Alarms has a switch for 10 or 15 minutes delayed alarm and movement sensor. These products are tested on certain well-defined parameters to ensure genuine quality, before their delivery at the clients' end. Some of the features of these products are as follows:

• Efficient performance
• Durable standards
• Water-proof

Remote Control

Remote control for MS1 motorstarter. For mounting on bridge.

Alarms for:

• Start/stop
• Test
• Phase/power failure
• Low oil
• Overload

Double Remote Control RC/MS

Double remote control for RC (rudder control) and MS2 or 2 pcs MS1 (motorstarter). Joystick for non-follow-up and rudder indicator. Facilities for connection of additional rudder indicator, non follow up and Full-follow-up.

Alarms for:

• Start/stop
• Test
• Phase/power failure
• Low oil
• Overload

VALVEUNIT PV 20/30

Seperate control valve unit. Complete with mounting plate, set of 24VDC solenoid, control valve, filter unit and non-return valve. Maximum work area: 25L/min or 50L/min.

REMOTE CONTROL MR200

Remote control for MS2 or 2 pcs MS1 motorstarter. For mounting on bridge.

Alarms for:

• Start/stop
• Test
• Phase/power failure
• Low oil
• Overload

MAGNETIC COMPASS NS140A

MAGNETIC COMPASS NS140ANS140A Magnetic compass, 6 inches, card diameter 140 mm. Accessories (Telescope bearing for table or panel mounting options.)

MAGNETIC COMPASS NS150A

NS150A Magnetic compass, 8 inches, card diameter 150 mm.
Accessories (Telescope bearing for table or panel mounting options.)

REFLECTOR COMPASS NS160A

Reflector compass with 505 or 1050mm binnacle. The binnacle is made of seawater resistant aluminium, fitted with a magnetic compass, NS-150A.

REPEATER DE180

Digital repeater with 1" digits.
Operates on NMEA 0183 (RS422 or RS232).
See further details in manual.
Accessories (Telescope bearing for table or panel mounting options.)

REPEATER DE200

Digital repeater/turning indicator with 2,24" digits.
The unit can operate on NMEA 0183 (RS422 or RS232), step by step 6 or 12 step/degree and syncro 360:1 input.
See further details in manual.

REPEATER BRB250

Bearing repeater for bulkhead mounting.
Facilities for Azimuth.
Operates on NMEA 0183 (RS422 or RS232), step by step.
6 or 12 step/degree.
See further details in manual.

REPEATER BRC250

Bearing repeater on column.
Facilities for Azimuth.
Operates on NMEA 0183 (RS422 or RS232), step by step.
6 or 12 step/degree.
See further details in manual.

Marine Diesel Engine

Mjr Corporation Engine supplies 15 types of main and auxiliary marine engines to more than 70 countries around the world. Built to cross oceans, some of our engines are as large as the 4V222TI engine, which is 1,200 horse power.

Master Gyro Compass

Autopilot, Magnetic Compass, Ruddar Angal Indicating Systems.(IMO Compliant), G2 GPS Satellite, Compass etc.

Echo Sounder

We offer a comprehensive range of ES1080 Echo Sounder which is a is a single frequency echo sounder with a 10.4" color TFT screen. This eco sounder offers the perfect sound investment for all ships and marine vessels. The range offers clarity of sound, precise clear cut eco to steer the ship to the right direction. The high technology involved in the process makes the range durable and efficient. Our range is most cost effective

Auto Pilot Admiral

We offer a precision engineered range of easy to use, easy to install Auto Pilot Admiral. The high accuracy range has the following features:

• NMEA 0183 input/output ports
• Auto Learning using IST Technology.
• WHEELMARK certified, IMO compliant
• Sunlight Viewable TFT LCD QVGA (320 x 240) display
• Auto Sea State adjustment for reliability in all weather condition.
• Auto Setup — automatic drive detection, automatic pilot calibration & automatic compass compensation

Automatic Identification System

These are some of the Features of Automatic Identification System:

• Safety — See and be seen using your on-board chart plotter
• Display graphically AIS target overlay on standard radars and multifunction chart displays
• Wireless exchange — Navigation status between vessels and shore traffic monitoring centers
• Vessel monitoring of Class A and Class B Transmissions over standard VHF frequencies
• Easily set up to automatically transmit a safety related message reducing search and rescue times
• Allows fleet of vessels to be efficiently monitored and port traffic better managed

Rugged Marine Computers

Rugged Marine Computers have the following specification.

• 10.4” and 12.1” Industrial Grade High Resolution TFT-LCD panel
• Full Range of High Performance, Lower Power Chipset Solutions
• Crystal Clear Sunlight Readable Touch Screen
• HotTab Application Software – Programmable Hotkey Design
• Optical Bonding LCD Technology reduces reflection
• User-Friendly Ergonomic Portable Design
• Wireless Communications – WLAN, Bluetooth, Wi-Fi and WWAN
• External Expansion Slot by PCI – Express, PCMCIA or USB for mobile Communication functions
• Aluminum-Magnesium Alloy Housing designed to withstand Shock and Vibration
• Quick & easy Snap–In Battery Pack – 6 Cell, 4800mAH Li-Ion Battery Pack AC Adaptor 110-220 VAC included

Navigator Radar

The Navigator Radar Skipper GDS 101 is a navigation Echo Sounder with a large, high resolution colour LCD display. The Echo Sounder graphics are continuously shown on the LCD along with complete navigational details. External connectors are provided for printer, VGA and NMEA in/output.

GPS Satellite Compass

GPS Satellite Compass has small compact all-in-one maintenance free unit. Fully compatible with NMEA 2000 or 0183 equipment:

Autopilots, Radar, AIS, Plotters, etc. Accurate 2D heading and positioning data. Better than 0.60 degree Heading accuracy. Provides Heave, Pitch and Roll information. DGPS provides sub-meter positioning accuracy.

5 GPM Marine Oily Water Separator

Easy to use and maintain:

• Completely automatic operation
• Simple design
• Self monitoring
• Self priming
• Continuous performance reporting
• Heavy duty industrial marine coating
• Factory installed bronze piping and valves
• On board flow indication

Marine Oily Water Separator 45 GPM

For use on vessels, platforms and other marine application.

Certification:

• T-107 Units Meet IMO MPEC 107(49) and New USCG Regulations
• T Units Meet IMO MPEC 60(33) and Old USCG Regulations
• Other units are uncertified and do not include the oil content monitor

Easy to use and maintain:

• Completely automatic operation
• Simple design
• Very low maintenance
• Self monitoring
• Self priming
• Continuous performance reporting
• Heavy duty industrial marine coating
• Factory installed bronze piping and valves
• On board flow indication

9.9HP 2-Stroke Sports Outboard Motor

Today’s outboards must be highly economical and deliver environmentally responsible operation. Using our unique vision and innovative technologies, we are constantly seeking new ways to provide our customers all over the world with outboards that meet these requirements and deliver satisfaction and excitement.

• Point-less Electronic Ignition (P.E.I.).
• Loop Charge Intake System.
• Dual Water Intakes
• Anti Corrosion Finish
• Through Prop Hub Exhaust.
• Stainless Steel Water Pump Housing.

Outboard Motor

18 HP Outboard Motor OBM, Manufacturing 2006, manual start And Tiller Model, les Run Only 50 Hr Run, Its a Petrol Engine, work Great on 10 to 18 fitter Boats.Today’s outboards must be highly economical and deliver environmentally responsible operation. Using our unique vision and innovative technologies, we are constantly seeking new ways to provide our customers all over the world with outboards that meet these requirements and deliver satisfaction and excitement.

DF200A is an "In Line" 4-stroke

The DF200A is an "In Line" four-stroke outboard is packed with technology. This four-stroke engine has large displacement, lots of torque and plenty of power. This four stroke engine is a clean runner and certified with a 3-Star Ultra-Low Emission rating from the California Air Resources Board (CARB) and has also met the EPA 2010 standard. So if you want to run with a proven winner, go four-stroke.

DF115A Sports Outboard Motor

The Suzuki DF115A is perfect for all kinds of freshwater boats, inshore boats and even offshore fishing boats. Bottom line, you won't find more power, more advanced technology or a more compact package anywhere.

DF175 Sports Outboard Motor

Suzuki's DF175 is based on an inline four cylinder DOHC powerhead with a 2,867cm³ (174.9 cu.in.) displacement. While the large displacement contributes greatly to producing exceptional acceleration and torque, it doesn't mean that they are comparatively larger and heavier in size. On the contrary, Suzuki's engineers have targeted this big block motor to be one of the lightest four strokes in the 175 HP class.

Voyage Data Recorder-VDR / SVDR

We bring forth an impregnable range of VDR / SVDR devices. This system records important information related to the vessel’s operation including safe collection and storage of voyage data such as ship position, movements, and physical condition and bridge commands for a stipulated time period, with the ability of playback. This is VDR / SVDR device is been fabricated by making use of latest machinery and equipment.

Mooring Winch

Our customers can avail from us a precision engineered range of MooringWinches. We make use of superior quality raw material to manufacture these winches in accordance with the set industry standards. The winches offered by us are widely used for pulling and letting out a cable or wire rope. These winches are demanded for machines like tow trucks, steam shovels and elevators, to name a few. Mooring Winches that we offer are used on land for marine and construction sites.

Our mooring winches are suitable for all types of ships in all shapes and designs. They are all made for working in harsh environmental conditions.

Winches are available with one or more drums and warping heads. The drum is ordinary or split type. Standard option is declutchable mooring drum and warping head mounted fixed on the shaft. Performance can be structural steel or stainless steel. Delivery is with or without auto tension control.

Technical Information
Drive: Electric / Hydraulic
Configuration: All option with drums and warping heads
Rated Pull(1st Layer): 10-500KN
Clutch: Manually / Remote
Brake: Manually / Remote
Release: Emergency quick release
Control: Local and remote control
Option: Spooling device / tension control / Chain Gypsy

Windlass

We have gained expertise in manufacturing a quality assured range of Windlass. The windlasses offered by us manufactured under the guidance of our expert professionals, who hold vast experience in this domain. They make use of high-grade raw material in the manufacturing process, which ensures optimum performance of the product. Moreover, these windlasses are tested on various well-defined parameters in order to offer a quality assured range to our customers.

Technical Information:
Configuration: Double gypsies, with two warping head
Driven Mode: Electric/Hydraulic
Working Capital: 9m/min(OR as per client request)

Hydraulic Knuckle / Foldable Boom Ship Crane

Features of Marine Knuckle Boom Crane:

• Long-life surface treatment: corrosion protection
• Operation from control platform on crane
• Electric hydraulic drive
• Continuous slewing
• Low/high temperature operations

Vertical Electric Hydraulic Mooring Capstan For Boat

Marine Mooring capstan, as the name indicates, is the capstan used for boat mooring when it reaches to a port or a dock. It has the same function as mooring winch. Mooring capstan also used for boat anchoring.

Ship Marine Electric Hydraulic Anchor Capstan

Anchor capstan is a machine that can be above deck-mounted or through deck-mounted or below deck mounted, and used for anchoring operations. It has the same functions as anchor windlass but in vertical,and more compact construction.

Single Arm Slewing Boat Davit And Crane

The Single arm slewing boat/raft davit is mainly used for lifting and lowering rescue boat, and also for lowering life raft. Additionally, it is also acted as crane based on client's requirement.

Marine Hydraulic General Cargo Crane For General Cargo Ship

General Cargo Crane are mainly installed on bulk carriers, container ships, general cargo and multipurpose vessels,tanker trans-loading and port cranes.
Our general cargo cranes are designed to meet the rules of all recognized classification societies and work in the tough conditions. The cranes are self-contained units with all machinery enclosed in the crane housing. This protects them from weather, corrosion and damage.Lifting Capacity from 25 to 90 tonnes, with outreaches of up to 41m.

Firelead

Standard Features:

• For departure angels up to 45 degrees
• Heavy Duty Steel Rollers
• Oil Impregnated Bronze Bushings (No Grease Required)
• Alloy Steel Shafts with Bolt-In-Place Keeper Tabs
• All Steel Frame Construction and Weld Down Base Plate
• Designed For Daily Use In Harsh Environment
• White Blasted and Coated With Blue Marine Duty Paint

Shark Jawas

Standard Features:

• Hydraulic Operated
• Heavy Duty Steel Rollers
• For Chain and Rope Use
• Size and Grade of Chain or Rope
• Pulling Capacity (Maximum) on Chain or Rope
• Optional: Hydraulic Power Pack

Chain Stoppers

Information needed to quote Chain Stoppers

Marine Motor Driven Vertical Centrifugal Water Pump

Standard Features:

• Compact design to save installation space
• Rigid connected with electric motor for easy maintance
• Bronze impeller and casing as standard, optinal cast iron casing

HEC Singles Stage, Single Suction Centrifugal Pumps

HEC series are singles stage centrifugal pumps driven by electric motor. Pumps are designed with BPO structure for easy maintenance and inspection.Standard pump spare parts are availble for fast delivery and replacement.The HEC pumps are widely applied in various ship as water cooling pump,general service pump.

Unclogging Marine Sewage Smash Pump

The SCP Series are single-stage centrifugal pump with open impeller and cutting device. The spare parts are easy to gain as standard design and large in stocks available. Main field of application of sewage water pumps is converting of sewage waters in the industry as well as in communal/domestic use.

Marine Stock TAIKO PUMP For Sale

Marine stock TAIKO PUMP for sale

• EMC-125 VERTICAL COOLING WATER PUMP WITH IRON CASING CAP: 88M3/H H: 30M 1800RPM 440V 60HZ
• NHD-2.5M HORIZONTAL AUX. F.O. TRANSFER PUMP For heavy oil, CAP:8.5M3/H, H:3M, 1800RPM 440V/60HZ
• NHG-1 HORIZONTAL AUX. F.O. TRANSFER PUMP For heavy oil, CAP:1M3/H, H:4.5M/7M, 1200RPM, 0.75KW, 440V/60HZ; with motor;
• NHG-2.5 HORIZONTAL AUX. F.O. TRANSFER PUMP CAP 3.5M3/H HEAD:30M 1200RPM 440V 60HZ 1.5KW with motor
• VSN-150 VERTICAL FIRE & BALLAST PUMP BRASS CASE CAP: 90/180 M3/H H: 80/30M 1800RPM SUC. : -5M POWER: 45KW 1800RPM 440V 60HZ

Electric Motor Driven Marine Centrifugal Pumps For Sea Water, Fresh Water And Oil Application

The centrifugal pumps are widely used in sea water, fresh water system of morden ships, vertical or horizontal mounted. And usually driven by an marine electric motor or an diesel engine.The pump capacity are from 1 m3/h to 3000m3/h and total head up to 220meters.

Mono Twin Triple Screw Oil Pump

G series single screw pump Flow: up to 300m 3 /h Differential pressure: Max. 2.4MPa Revolution: Max. 1800rpm Working temperature: up to 150℃ Viscosity: Max. 2.7 x 10 5 cst Classifications: CCS/ABS/BV/DNV&GL/RMRS/KR/LR Installation: vertical or horizontal mounted.....

Marine Positive Displacement Internal And External Gear Pump

Description: KCB/2CY series gear pump Product Features: Universal type, used as lubricant pump, delivery pump and supercharge pumps Flow:1.1~58m 3 /h Differential pressure: Max. 1.45MPa Revolution: Max. 1800rpm Working temperature: up to 80℃ Viscosity:5~1000cst..

Submerged Pump To Transport Sewage Water

CQX type Marine submersible pumps: Feature: compact design light weight portable Mainly for marine emergency rescue application by eliminating the bilge water, industry and agriculture irrigation and drainage. Capacity: up to 650m 3 /h .

D G Set

With the help of our proficient professionals, we have been able to offer a precision engineered range of D G Sets. These sets are manufactured using high-grade raw material and advanced technology to remain in tandem with international standards and norms.
The sets offered by us are widely demanded by the customers for their excellent features like hassle-free performance, longer functional life and strong construction. Moreover, these sets are available in various specifications that suit the variegated requirements of our clients.

Marine Electric Switch Boards

We bring forth an impregnable range of Marine Electric Switch Boards. These systems offer ideal electrical solutions to ships and other seaworthy vessels of various sizes. Our switch boards are very accurate and offer matchless performance and reliability. These systems are offered in diverse specifications and sizes to suit the size of the ships and boats.

Navigation Light Control Panel

Our company is highly acclaimed in offering a wide range of Navigation Light Control Panel. These systems offer constant monitoring of remote navigation lights and wiring, when lights are on or off. This panel can regulate bulky power loads with various AC and DC voltages. Our control panel is protected from external short circuits accepts extensive range of light wattage.

Air Horns And Whistles

We offer an efficient variety of Air Horns & Whistles services that are greatly appreciated by our clients in the marine sector. These products are valued for being accurate, precision engineered and of durable nature. The range has compressed air working pressure of between 7 and 40 kgr/cm2 with two valves. Electrical drive motor of 5.5 kw. (7.5 HP). Our system is controlled by the wheelhouse.

DC To DC Converters

We bring for our clients a premium range of DC TO DC Converters that can be availed in various specifications. This high technology base item finds application in various industries. The critical technology used in the manufacturing process makes the range durable, hardwiring and resistant to wear and tear. One of its most appreciated feature is its energy efficiency. Our range includes DC TO DC Converters 24VDC to 24VDC, 24VDC to 12 Watt VDC.

Baud Rate Converter

VL-BRC08 represents a software version of the MCU5 hardware. This hardware has been tested successfully according to the IEC60945. The basic function of the software is to receive NMEA-Telegrams with an adjustable baud rate from 4800bps to 38400bps and send these telegrams with a separately adjustable baud rate from 4800bps to 115200bps. In addition, the transmission frequency of the last received telegram can be set.

NMEA to Analog Converter

VL-N2A is a converter for converting information from NMEA telegrams into analog current or voltage signals. The data is exchanged via the serial port type RS422. All received NMEA messages are given out remain unchanged. Additionally alarm messages of the converter can be sent.

Gyro Repeater

Our company is engaged in offering the most preferred range of VL - Gyro Repeater. The VL - Gyro Repeater indicates heading and rate-of-turn. Depending on the rate of-turn, the two color LED ring rotates, towards starboard in green and towards portside in red. Automatic Baud rate detection supports easy installation and commissioning. This VL - Gyro Repeater is featured with latest technology that is widely appreciated in the industry.

Ship Horns

Clients look forward to sourcing marine products from us because of our association with most renowned manufacturers both in domestic and international markets. The Ship Horns that we procure for our clients from trusted manufacturers are very simple to install and are extremely user friendly. This highly durable range is offered in most affordable price structure. We offer the range in varied specifications and also customized solutions. Our range is further renowned for stability and energy efficiency.

Hydraulic Capstan

Capstans can be supplied with a pull of 0.5 to 15 tonnes and can be mounted vertically or horizontally for use on a ship's deck, in a factory or quayside. They can also be supplied with polished stainless steel heads and mounting plates if required.Drive can be manual, electric, hydraulic and pneumatic. We can also supply the controls required as a complete package.

Technical Details:

• Driven: Hydraulic
• Working Load: 30kn
• Nominal Speed: 10~15m/mn
• Warp Head Diameter: φ340 x 315mm(h)
• Outline Dimension: φ800 x 810mm(h)
• Weight: 750kg (Approx.)

Electric Capstan

A vertical drum capstan for railway, marine and industrial pulling applications, which features high starting torque to enable an initial load pulling capacity double the rated capacity, generally used to pull rail cars along sidings, and also can even be deck-mounted on marine vessels to pull water-soaked lines, nets and equipment on board.With various drum diameters, motor styles and line speeds, vertical capstans may be customized to fit specific requirements.Marine grade motor for harsh & humidity environments. Two speed motor with EM brake.

Technical Details:

• Features: Compact design
• Working Load: 50 kn
• Nominal Speed: 10m/min
• Motor Power: 10/3 kw
• Protection Class: IP56
• Voltage: 400v/50Hz/3ph
• Options: Additional Band brake, manual clutch,Lever control stand for ship’s deck mounting.

Hydraulic Winch

Winch is a stationary motor-driven machine that is used for various applications including mooring, anchor handling, bridle, towing, coring and seismic, having a drum around which is wound a rope or chain attached to the load being moved. A hydraulic winch is driven by a hydraulic pump, the fluid pressure coming from a hydraulic Power Pack driven by the main engin

Technical Details:

• Working Load: 40~60KN
• Nominal Speed: 10/15m/mn ( 1 layer)
• Drum Capacity: φ18-20mm x 120 (four layer)
• Clutch Control: Manual
• Outline Dimension: 1726L x 1203W x 1235H (mm)
• Base Dimension: 1303L x 1050W (mm)
• Weight: 1350kg (Approx.)

Electric Winch

Winch is a stationary motor-driven machine that is used for various applications including mooring, anchor handling, bridle, towing, coring and seismic, having a drum around which is wound a rope or chain attached to the load being moved. Drive can be manual, electric, hydraulic and pneumatic. We can also supply the controls required as a complete package. Marine grade motor for harsh & humidity environments. Two speed motor with EM brake.

Technical Details:

• Features: Compact design
• Drum Capacity: 250m@φ16 wire 6 layers
• Rated Pull: 5t x 10m/min @1st layer
• Brake Holding: 7.5t @ static 1st layer
• Protection Class: IP56
• Power Rating: 11/3kw, 400v/50Hz/3ph
• Options: Additional Band brake, manual clutch,Lever control stand for ship’s deck mounting.

Boat Winches

In order to meet the diverse requirements of esteemed clients, we are engaged in offering an unparalleled range of Boat Winches. These boat winches offered by us are developed using optimum grade raw material at reliable vendors' premises. In addition to this, the offered range of boat winches is available in different specifications and is appreciated among the clients for its high performance and durability.

Marine Engines

We are engaged in offering the most preferred range of Marine Engines. These engines are offered in diverse ranges from 160 BHP to 7000 BHP along with Gearbox and Stern Tube arrangements including Shaft and Propeller, also CPP. Our Marine Engines are offered in different technical specifications that meets all the requirements of the marine industry.

Marine Gear Boxes

We bring forth an impregnable range of Marine Gear Boxes. This Marine Gearbox is extensively used in Marine Power Transmission to very small boat to long vessels.
These boxes are available in both standard and customized solutions, as per the requirements of our clients. We take into account the diverse application needs of marine industries and offer suitable range of Marine Gear Boxes

Marine Propellers

Our clients are very satisfied with the optimum quality range of Marine Propellers, which offer solutions to the requirements of clients in the automobile industries for enhancing the engine efficiency. These products are manufactured using high class stainless steel as well as other alloys. The products offered by us are durable, efficient, and resistant to corrosion. Offered at most affordable prices our range offers great value for money.

800KN Marine Hydraulic Positioning Winch

This 800KN marine hydraulic positioning winch is used for offshore wind installation, consists of one drum with rope groove, gears, brakes, clutches, foundation, hydraulic motor, and so on. These positioning winches are certified by CCS surveyor, and have good performance.

Basic Information:
Driven Mode: Hydraulic motor operated.
Type: Single drum with rope groove.
Safe Working Load: 800 KN (at first layer)
Rated Speed: 10m/min at first layer.
Drum Capacity: 60mm x 1000m
Local and remote control
Hydraulic Power Unit
1) Quick Clutch In/Out
2) Quick Emergency Release
3) Dynamic Brake
4) Constant Tension

Air Bottle

An air receiver, also called air bottle is a large container acting as a reservoir to store compressed air supplied by the air compressed system of the ship. The storage compressed air is used to start and control main engine or auxiliary engine.

Type: vertical or horizontal
Configuration: carbon steel, stainless steel
Volume:90~10,000 litres
Nominal size: up to DN1600
Drum Capacity: 60mm x 1000m
Maximum permissible gauge pressure:11, 16, 45, 50 bar

Air Compressors

For meeting the variegated requirements of our customers in an efficient manner, we are engaged in offering a wide array of Air Compressors. Designed using premium quality raw material, these compressors are vibration, simple in operation, easy to maintain. Moreover, the compressors offered by us are suitable for heavy duty and continuous operation. These compressors have low and high pressure cylinders, which have an inter cooler in between them.

Aluminum Gangway Ladder, Accommodation Ladder, Wharf Ladder

Aluminum accommodation ladder is suitable for all kinds of ships for embarkation. There are two types: Type A Integral Aluminum Gangway Ladder, Type B Detachable Aluminum Accommodation Ladder. We made the aluminum accommodation ladder according to CB3116-1982.
Type A accommodation ladder length range: 8000-15000mm.
Type B accommodation ladder length range: 4000- 7500mm.

Anchor & Mooring Capstans

Technical Information .Configuration: above deck, through deck, and below deck .Driven Mode: Electric / Hydraulic .Working Load: 10 to 300KN .Working Speed: 10 to 30 m/min .Controls: Local / Remote .With or without chain wheel/gypsy

Towing Winch

we offers towing winches for all types of tug boats. Winches can be driven hydraulically and electronically.The technical solution is with enclosed gears, submerged in lubricating oil. All kinds of control and information are possible: local control, pendant control with cable, radio control or bridge control panel with joystick including required functions and automation.Very robust design allows operation in all conditions. Standard design is with chain lifters and warping heads.

Technical Information
Drive Electric / Hydraulic Configuration All option with drums and warping heads Rated Pull 5 to 80 Tones Chain Size 24 to 76mm, Grade 2 or 3Clutch Manually / Remote Control Local and / or remote control

Tugger Winches

We offers a wide range of different tuggers. The robust design allows safe and long-term operation in harsh environmental conditions. Winches are electric or hydraulic driven.We offer various options according to customer’s requirements with a manual brake, clutch and warping head. There are various control options: local, remote with wire or radio control, bridge control. Technical Information:Drive Electric / Hydraulic Configuration All option with drums and warping headsRated Pull(1st Layer) 5 to 25TonesBrake 1.5 times of rated pullWire Speed(1st Layer) Up to 50 m/minControl Local and remote control

Complete Deck Machinery

Our company is highly acclaimed in offering a wide range of Complete Deck Machinery. We offer this deck machinery in standard and customized solutions to meet the specific requirements of our clients. Our deck machines are durable, sturdy and are dimensionally accurate. This Complete Deck Machinery is available with advanced attributes that makes it one of the most sought after products in the industry.

Generator Diesel Engine

Our organization is engaged in offering a precision engineered range of Generator Diesel Engines for our customers at market leading rates. The engines offered by us are manufactured under the guidance of our expert professionals, who manufacture the entire range in compliance with the set industry standards and norms. The engines offered by us are known for their optimum performance, longer functional life, strong construction and easy maintenance.

Marine & Industrial Capstan

2,000 to 20 Tons Line Pull and Larger
Electric - Pneumatic - Hydraulic
Thru Deck, Semi Thru Deck, Right Angle

Marine 360 Degree Swivel Anchor Fairlead

Swivel anchor fairlead, installed on the deck of ships, is one kind of fairlead device which is used for ship mooring. In the central body of the fairlead there is opening for mooring ropes or anchor chains.

Specification:
Model: Swivel Anchor Fairlead.
Rope Diameter Range: 20mm to 76mm.
Breaking Strength: 32-200ton.
Sheave: Single or double sheave.
Material: cast steel.
Available Certificate: CCS, ABS, BV, LR, RINA.

Marine Compressors

High pressure Marine compressors for the marine environment for over 70 years. Hamworthy Seismic Compressors high efficiency with low lift concentric valve and generous inter-stage cooling minimise the amount of absorbed power. Each machinery package includes a choice of drive, skid base and control system and is engineered to suit your requirements

Marine Side Scuttles/ Portholes / Portlights Type A B C

Marine side scuttle/portholes are used for sea-going ships and warships, also could be used for inland ships. Our marine side scuttles/portholes are meets the requirements of IMO, SOLAS.
Marine side scuttle/portholes are divided into 3 types: A heavy type, B medium type, C light type.

Application:
A Heavy Type: With watertight and gas-tight requirements above full load waterline, below free board.
B Medium Type: Above free-board, first deck for cargo vessels.
C Light Type: Above free-board for passenger vessels.
Features of Marine Side Scuttle / Portholes:
Standard: GB/T 14413-2008
Material: Steel, Brass, and Aluminum
Installation Method: Bolted or welded.
With or without dead-light.
Clear size of marine side scuttle/Portholes: 200mm, 250mm, 300mm, 350mm, 400mm, 450mm.
Available certificate: CCS, BV, ABS, LR, DNV, etc.

Marine Watertight Steel Hatch Cover

Quick acting watertight hatch cover is suitable for all kinds of marine hatches required quick acting and high pressure. There are 2 types: Type A round quick acting watertight hatch cover and Type B Square Quick Acting Watertight Hatch Cover.

Opened Fixed Marine Rectangular Window

Marine rectangular window is used for the windows of superstructure above free-board deck and deck house. It meets ISO3930-1993.
From opening method, marine rectangular window has two types: one is open type, the other is fixed type. And from the installation method, marine rectangular window can be divided into two type: bolted type and welded type.

Steel/Aluminum Marine Manhole Cover

Marine manhole cover is suitable for ship watertight and oil tight manhole cover, comply with ISO5894. We designed the marine manhole cover according to GB/T5746, CB/T19-2001 AND ISO3903.

Yokokoma Type Pneumatic Rubber Fenders

Yokohama type fender also called chain and tyres net pneumatic fender. It is often installed on the terminal or ship, which aims to absorb or reduce the collision energy between ship to ship and ship to dock.

Features:

• 1. Easy and fast to deploy
• 2. Strong fender wall & High duty aircraft tyres net
• 3. High energy absorption, low reaction and hull pressure
• 4. Suitable for small and large tidal ranges
• 5. Application areas Oil and gas tankers, Fast ferries and aluminum vessels, docks ocean platforms etc.

Tube Type Water Maker/ Reverse Osmosis Fresh Water Generator

Marine hot water calorifiers for ship and offshore use. Our calorifiers come ready-connected with control cabinet, heating elements and thermostats. Alternative heating sources and circulation or pressure boosting pumps can also be provided.

Type: vertical, horizontal or bulkhead-mounted bridgeConfiguration: carbon steel, stainless steel
Volume in Litres:120, 200, 300, 500, 1000, 1500
Classifications: CCS/ABS/BV/DNV&GL/RMRS/KR/LR

Blower and Fans

MEZ Series Marine Ex-proof Axial Fan
Air flow: 500m3/h to 180000m3/h
Total pressure: 100~1050Pa
Power:0.55~90Kw
Power supply:AC220V/380V/440V/415V, single or three phase
Classification cert.: CCS, ABS, BV, RINA, RMRS, IRS, DNV & GL

Dredge Cutter Head

Dredge Cutter Head Features

1. Number of Blade: 5 or 6
2. Inner ring diameter of dredge cutter head is from 830mm to 2400mm.
3. The cutter head have replaceable dredge teeth.
4. The dredge cutter head have many applications, can be used for rock, mud, slurry, sand and gravel.
5. The superiority of the rock cutter head is the result of unmatched design and metallurgical capabilities.
6. Refined tooth and cutting edge design.
7.Easy to maintenance, with minimum maintenance cost.
8. Exceptional wear resistance, high quality.
9. The cutter head can be supplied with shaft, bearing and gearbox.
10. The cutter head has low spill.

Universal California Active Type Dredge Drag Head

Features:

1. Easy to maintenance
2. Suction pipe diameter from 400 to 1300mm.
3. Efficient hydraulic design.
4. Replaceable wear blocks and side skirts.
5. Replaceable teeth system .

Dredge Ball Joint

Features:

1. Easy assembly and disassemble.
2. Low maintenance cost
3. Easily replace liners.
4. Sizes for pipe inner diameter from 400mm to 1200mm.
5. Made for low, medium and high pressure .
Ball turning angle 15 degree and 18 degrees

• Tilting angle of 15 degree
• 10bar, 20bar and 30bar
• Tilting angle of 18 degrees
• 10bar, 20bar and 30bar

Dredge Gate Valve

1. Dredge gate valves are developed according to the specific requirements of pipe used for dredger.
2. Dredge gate valves are driven by hydraulic cylinder and sealed by rubber
3. Stainless steel wedge gate and heat-affected valve body.
4. Smart structure, high resistant pressure and reliable seal.
5. Smart structure, high resistant pressure and reliable seal.
Ball turning angle 15 degree and 18 degrees .
6.Types: Switch type and continuous display type.
Dimensions range from DN300mm to DN1400mm.

Deck Machinery-Mooring Winch

Deck machinery-mooring winch

Deck Machinery-Windlass

Deck Machinery-Windlass

External Communication Equipment

Our company is highly acclaimed in offering a wide range of External Communication Equipment - GP328. These are offered with an affordable one time fixed investment cost and no talk time charges. Motorola’s GP Series brings new level of productivity to the workplace. Small-to-large companies, in virtually all industries, use Motorola Two-Way Radio to get instant communication with people on the move. These are renowned for their unique features such as operate two-way radio to contact people who are mobile and are often away from their desk, to make several calls to repeat the same message, to manage a facility or more than one building, majority of your company’s communication needs are within the vicinity and to communicate within a close vicinity.

Radio Communication Equipment

We bring forth an impregnable range of Radio Communication Equipment. This is a Versatile Radio for those who need to communicate frequently with multiple work groups, to be on the move outdoor most of the time, to communicate in a high-noise environment, to co-ordinate law enforcement and emergency and constant up-to-the-minute information.

GM338 Marine Equipment

In a rapidly changing market, you need a communication solution that enables you to respond immediately to your customer requests and maximise productivity. With Motorola GM338 and GM398 conventional mobile, you can now enjoy instant and reliable communication to keep your mobile team working efficiently. Whether you are a courier service personnel where information on direction is critical, or a police officer needing emergency backup at an accident scene, or a transportation company that wants to improve its fleet management, both the GM338 & GM398 mobile radios are solutions that let you stay in touch and in control.

Satcom Marine Equipment

Satcom marine equipment

AIS Marine Equipment

AIS Marine Equipment is the mariner's most significant development in navigation safety since the introduction of radar. The system was originally developed as a collision avoidance tool to enable commercial vessels to ‘see' each other more clearly in all conditions and improve the helmsman's information about his surrounding environment. AIS does this by continuously transmitting a vessels identity, position, speed and course, along with other relevant information to all other AIS equipped vessels within range. Combined with a shore station, this system also offers port authorities and maritime safety bodies the ability to manage maritime traffic and reduce the hazards of marine navigation.

Marine Equipment -AIS-GPS

The SeaView Dual AIS-GPS Receiver from SevenStar works with chart plotters and charting software for laptops and PDAs, and shows 'contacts' and their ID and course on the plotter display. You can see who else is within your vicinity, even if they are behind another object! (Headland, island, ship

Navtex Marine Equipments

Navtex is a system for the broadcast and automatic reception of maritime safety information by means of a narrow-band direct-printing telegraphy. Navtex provides shipping with navigational and meteorological warnings and urgent information through automatic printouts from a dedicated receiver.

Marine Equipment Buoy

The float ability and unsinkability are guaranteed by 24 plastic modules which are inserted in a steel structure which also hosts the balancing bollard pull levers.The buoy is equipped with a Marimatech 250-ton quick release hook.On the hook there is a load cell, which measures with precision the mooring line tension.

Steel Buoy

Focal plane : 3000 mm
Diameter : 1900 mm
Net buoyancy : 4700kg
Materials : galvanized steel, Nuts & Bolts: S.S.AISI 316, Floating body : steel and polyurethane foam

Marine Boat Door

Marine Boat / Ship Steel Door

Quick Open & Closing Weather Tight Door

Quick Open & Closing Weather Tight Door

Hydrophore Tank

Product Details:

Storage Capacity - 500L

Hydrophore Tank :

Hydrophore tank for ship & offshore use.

Marine Magnetic Compass

Owing to our experience, we have been successful in catering to the requirements of our honorable patrons by offering a comprehensive range of Marine Magnetic Compass. This range of marine magnetic compass is available in varied dimensions, sizes and other specifications in accordance with the diverse demands of the clients. Furthermore, this range of marine magnetic compass is offered to customers at market competitive rates.

Features :

• Light weight
• Compact size
• Longer life

Alarm Logger - Marine Equipments

Alarm Logger is a parallel recording device designed to work alongside the current printed alarm history from the ships' automation printers. Alarm data is stored at the VL - Computer and can be retrieved for later viewing and evaluation. Even if the original printer is out of order, the VL-Alarm Logger will continuing recording, and when installed as part of the ship's LAN, stored files can easily be sent by email to the owner's office.

AC-14 High Holding Power Anchor

Material of AC-14 HHP anchor: SC42. The AC-14 HHP stock-less anchor is our traditional and advantaged product with weight range from 25kg up to 20625kg.

Cast Steel Bar Type Chain Stopper CB 286-84

CB*286-84 Bar Type Chain Stopper is cast steel lever chain stopper that is commonly used to control the movements of anchor chain and reduce the load of windlass. It is applicable to AM1, AM2, AM3 anchor chain, which diameter ranges from 12.5mm to 68mm. This cast lever chain stopper is strictly produced according to the shipbuilding standard CB*286-84.

Features of CB*286-84 Bar Type Chain Stopper

1.Model type: cast lever chain stopper
2.Standard: CB*286-84
3.Material: cast steel (ZG25 II)
4.Nominal Anchor Chain Diameter: 12.5-68mm
5.Nominal Weight: 20-363KGS
6.No cracks, air holes, scars or any defects to influence chain stoppers’ strength.
7.Lubricated friction surface and bitumen paint.
8.Qualified quality certificate and the certificates are CCS, ABS, BV, LR, GL, DNV, NK, etc.
9.Can be designed according to customers’ requirements.

Kidney, Staghorn, Tee, Curved, Y, J, R Type Dock Bollard

Features of Dock Bollard:

1.Capacity: up to 200 tones.
2.Material: cast iron, cast steel, cast SG iron.
3.Color: depends on the need of dock.
4.Surface: high corrosion resistance, polished, galvanized.
5.Bolts quantity: 4 to 8.
6.Certificate: CCS, ABS, GL, etc.

30Bar Air Cooled Starting Air Compressor

This series air compressors are mainedly used onboard ship to start the maine and auxilairy engine.The are directly driven by marine induction motors.
The air compressors are two stage, single cylinder compressor cooled by fresh water or sea water. Liquid-gas separators are fitted on each stage. The air compressors are rotated clockwise viewed from the driven end.

Main Specifications

Capacity 45m3/h~195m3/h
Dis. Pressure Max. 3.5MPa
Revolution970rpm, 1170rpm, 1470rpm
Power supply AC380V/50Hz and AC440V/60Hz
Dis. Temperature less than 60
Lubrication oil

4 Blades Propeller

The range of fixed pitch propellers from ACIR are suited for a wide variety of pleasure craft applications including sport fishing boats, cruisers, motor yachts, as well as for many commercial applications.

Advantages

Optimized propulsion performance
Customized design
Silent and fuel efficient operation

High Speed Propeller

For high speed propellers, even the static balance is good, it doesn't mean that it could have a good effect under high speed.

To guarantee the dynamic balancing performanceof all our high speed propellers, both dynamic balance and static balance test will be carried out before delivery.

Vertical Electric Hydraulic Mooring Capstan For Boat

Marine Mooring capstan, as the name indicates, is the capstan used for boat mooring when it reaches to a port or a dock. It has the same function as mooring winch. Mooring capstan also used for boat anchoring.

Features of marine mooring capstan:

1. This capstan can adopt electric or hydraulic drive.
2. Configurations are vertically mounted.
3. Warping head of the capstan uses cast steel.
4. Rated pull of the 1st layer can reach from 3MT to 15MT.
5. Max wire speed of this capstan winch is 20m/min.
6.Local control is available for customers.

Electric Hydraulic Mooring Winch With Single Double Drum

A mooring winch is a part of anchor mooring systems used during mooring operations to hold a boat in place at a pier or similar fixture. A mooring winch is operated in a number of ways and fixed in place on the deck of a ship in key positions.

Features of Marine Mooring Winch

Driven Mode: Manual, Electric, Hydraulic and Diesel Engine Operated.
Configuration, 1, 2, 3, 4 mooring rope drums, with or without chain wheel (gypsy, wildcat) and warping heads as per clients’ request.
Safe Working Load: 1 ton to 100tons at first layer on each drum.
Nominal Speed: 9-20m/min at first layer on each drum.
Drum Capacity: Any rope diameter and length as per client’s request.
Certificate: CCS, BV, ABS, GL, LR, DNV, etc.

Electric Hydraulic Single Double Drum Towing Winch Tugger Wi

Marine towing winch is known as the winch usually installed on a boat to tow another boat. It consists of drum, brake unit, clutch, wall frame, base, spooling device, drive device, control device and so on. It is mainly used to connect tug boat with the towed boat,bear the corresponding load, and meanwhile it also used to reel, release and store rope.

Features and Benefits:

Driven Mode: Electric, Hydraulic, and Diesel Engine
Configuration: Single or double drum in horizontal or waterfall type.
Rated Pull x Speed : (10 T to 200T) x (6-15m/min) at first layer
Drum Capacity: 100-2000m according to client’s request.
Warping Head, Auto-spooling device, load/rope out/speed monitoring system are available upon request.
Available Certificate: Maker Certificate, CCS, ABS, BV, GL, LR, DNV, etc.

Marine Fixed Stiff Straight Boom Deck Crane

The cranes are available in the range from 141 - 30000 KN.m lifting moment and are supplied according to customer requirements. The stiff boom cranes can be delivered within a broad range of certifications and numerous optional features. Stiff boom cranes are typically used in dock,on fixed installations and in harbor conditions.

Features of Marine straight boom cranes:

Long-life surface treatment: corrosion protection
Operation from control platform on crane
Electric hydraulic drive
Continuous slewing
Low/high temperature operations

AM2 AM3 Stud Link Anchor Chain Dia.12.5mm To 100mm

Marine Anchor Chains has 2 grade: Grade 2 and Grade 3; We can provide 12.5m to 162mm marine anchor chains. All marine anchor chains can be tested by UT & MT detection and loading test, etc.

Product Details:

1.Chain Diameter: 12.5mm to 162mm
2.Grade: U2/ U3
3.Material: Steel
4.Surface treatment: Hot Galvanized, Black Painted.
5.Certificate: CCS, ABS, LR, BV, NK, GL, DNV, RS, IRS, etc.
6.Guarantee Period: 12 Months after ship delivery.

Cast Steel Bar Type Chain Stopper CB 286-84

CB*286-84 Bar Type Chain Stopper is cast steel lever chain stopper that is commonly used to control the movements of anchor chain and reduce the load of windlass. It is applicable to AM1, AM2, AM3 anchor chain, which diameter ranges from 12.5mm to 68mm. This cast lever chain stopper is strictly produced according to the shipbuilding standard CB*286-84. It meets the regulatory requirements of CCS, GL, LR, DNV or other classification societies.

Features of CB*286-84 Bar Type Chain Stopper

1. Model type: cast lever chain stopper
2.Standard: CB*286-84
3.Material: cast steel (ZG25 II)
4.Nominal Anchor Chain Diameter: 12.5-68mm
5.Nominal Weight: 20-363KGS
6.No cracks, air holes, scars or any defects to influence chain stoppers’ strength.
7.Lubricated friction surface and bitumen paint.
8.Qualified quality certificate and the certificates are CCS, ABS, BV, LR, GL, DNV, NK, etc.
9.Can be designed according to customers’ requirements.

D Type Rubber Fender With Diameter 100 - 500mm

The most common rubber bumper mounted on ships or docks, boast higher energy absorption than cylindrical fender and reasonable reaction force. D fenders are extruded into small D-shaped structures with punched holes for easy installation and replacements. Normally, they are ideal for following applications: Tugboats, work boats, fishing boats etc.

1. Reasonable reaction force and high energy absorption
2.Easy to install and maintain or replace
4.Especially suitable for frame type wharf and shore protection of the wharf.It can also be used in protection of vessel.

Kidney, Staghorn, Tee, Curved, Y, J, R Type Dock Bollard

Dock bollard has different types for specific mooring use. It includes kidney bollard, stag-horn bollard, tee type bollard, curved type bollard, Y type bollard, J type bollard, R type bollard, CVI type bollard, etc

Features of Dock Bollard:

1. Capacity: up to 200 tones.
2.Material: cast iron, cast steel, cast SG iron
3.Color: depends on the need of dock.
4.Surface: high corrosion resistance, polished, galvanized.
5.Bolts quantity: 4 to 8.
6.Certificate: CCS, ABS, GL, etc.

Cast Steel Closed Chock JIS F2005-1975

Closed chock is one form of mooring chock which used to guide the mooring ropes. JIS F-2005 closed chock is made according to marine standard of Japanese standard association. JIS F-2005 is made of cast steel. Its surface is galvanized, polished and painted to be smooth, which can reduce the friction of the rope.

Specification:

Model Type: JIS F 2005-1975 Closed Chock
Material: Cast Steel
Nominal Size: 100mm-200mm, 250mm - 500mm.
Weight: 3.7kgs - 24kgs, 48kgs -232kgs.
Standard: JIS F 2005-1975
Available Certificate: CCS, DNV, ABS, BV, LR, RS, KR.
Choice will depend primarily on the size of the vessel and the diameter of the lines.

Manual Or Pneumatic Control Disc/Harbor/ Spring Type Quick R

The quick release harbor type towing hook is especially designed for towing with steel wire ropes. Derived from the proven mooring hook design the harbor type is also used as towing hook.

The quick release harbor type towing hook is especially designed for towing with steel wire ropes. Derived from the proven mooring hook design the harbor type is also used as towing hook.

The standard range harbor type towing hook is available from 15-100tones SWL. Higher loads are available upon request.

Spring towing hook is one type of marine towing hooks that are used for towing or releasing the mooring line. Marine towing hook is easy to operate and release the mooring line in a short time. It is more effective than marine bollards, which reduces the labor intensity and improve the labor efficiency, safety and liability.

To meet customer’s different requirements, spring towing hooks have different types and sizes. We supply pneumatic release spring towing hook, manual release spring towing hook and other customized towing hooks according to your requirements.

History of Modern Shipping
The period from 1800 until the Second world

Cu1 Cu2 Cu3 Marine Fixed Pitch Ship Propeller

Fixed pitch propeller (FPP) is both cheaper and more robust than controllable pitch propeller (CPP). Also, an FPP is typically more efficient than a CPP for a single specific speed and load condition. Accordingly, vessels normally operate at a standard speed (such as large bulk carriers, tankers and container ships) will have an FPP optimized for that speed.

Features:

1.Type: Fixed Pitch Propeller (FPP)
2.Material: Cu1, Cu2, Cu3, Cu4.
3.Propeller diameter ranges from 1000 to 8000mm.
4.No. of Blade: 3-5
5.Propeller weight is up to 100tones.
6.Skew Angles: 0-skew available.

316L 304 Stainless Steel/Forged Marine Propeller Shaft

On a power-driven ship, the propeller shaft usually connects the transmission inside the vessel directly to the propeller, passing through a stuffing box or other seal at the point which exits the hull. It usually can be used for many years. It ensures the function of vessel, so propeller shaft is a very important part of the propulsion system.

Features:

1.Material: Stainless Steel, Forged Steel, Alloy Steel according to clients’ request.
2.Test Method: 100% Ultrasonic flaw detection test.
3.Design and manufacture according to customer’s request and drawings.
4.Available Certificate: CCS, ABS, BV. GL, LR, DNV, KR, NK, IRS, etc.
5.High quality, with a competitive price.
6.On time delivery as per contract.

Stainless Steel 316L Ship Drive Shaft With 100% UT Test

As a driving shaft, propeller shaft will give vessels a huge thrust when sailing. So it plays an important role in the propulsion system.

Features:

1. Material: Stainless Steel, Forged Steel, Alloy Steel according to clients’ request.
2. Test Method: 100% Ultrasonic flaw detection test.
3. Design and manufacture according to customer’s request and drawings.
4. Available Certificate: CCS, ABS, BV. GL, LR, DNV, KR, NK, IRS, etc.
5. High quality, with a competitive price.
6. On time delivery as per contract.

Electric Hydraulic Thruster With Fixed Pitch Propeller

Bow thruster is a propeller mounted in tunnel at the bow below the waterline to make vessels maneuvered much easier. It can be powered by diesel engine, electric motor, or hydraulic motor. When fixed pitch propellers are used, electric and hydraulic motors allow the direction of thrust to be reversed. And an additional reversing gearbox is required if the thruster is powered by a diesel engine.

Features:

1.For extreme load conditions
2.For continuous and short time service.
3.Low noise and vibration.
4.Compact design due to horizontal, vertical or inclined arrangement of the power input flange.
5.Combined with diesel engine, hydraulic or electric motor driven.
6.Available certificate: CCS, BV, ABS, DNV, NK, KR, GL, RINA, etc.

360 Degree Z Type Hydraulic Azimuth Thruster With Nozzle

Azimuth thruster with nozzle is a kind of Z type propulsion. It combines the function of tube propellers and steering gears. The part under water can steer by 360 degree free rotation. All directional propulsive force is formed. The device combines the highly efficiency of tube propellers and flexibility of azimuth thruster.

Lateral Azimuth Thruster With Contra-Rotating Propellers

Azimuth thruster with contra-rotating propellers combine the structure advantages of the contra-rotating propellers and the flexibility of Azimuth thruster. While providing All-directional propulsive force, the diameter of the propellers is shortened, the propulsive efficiency is improved, the vibration and noise is decreased effectively.

Marine Pumps

A centrifugal pump is a machine that uses rotation to impart velocity to a liquid, it then converts that velocity into flow.Centrifugal type pumps are widely used in the sea water, fresh water system in ships. Centrifugal pump fpr maritime applications are usually driven by an marine electric motor or diesel engine.
Standard electric vortex pump for water usage
CWX series are vortex type water pump driven by electric motor

Performance Range
Flow:3~10m3/h
Head:35~40m
Revolution: 1450rpm/2950rpm/1750rpm/3550rpm
With suction height up to 7meters.
Classifications: CCS/ABS/BV/DNV&GL/RMRS/KR/LR
Applications: condensate water pump, potable water pump, daily sea water and fresh water pump, air conditioning cooling pump

1.5m Dia Buoy

1.5m dia Buoy : a range of low maintenance, cost effective, small to medium sized polyethylene buoys for the marine navigation industry.

1000 Mm Dia Buoys

Deployed in over 35 countries, Tideland’s high performance multi-purpose and channel marker buoys are ideally suited for use in harbors and rivers. These polyethylene buoys use the same materials and manufacturing technologies
UV Stabilised polyethylene provides rugged, lightweight buoys with exceptional station-keeping, long-life and stability. The hulls are filled with expanded polystyrene making the buoys virtually unsinkable. Buoys are available in red, green, yellow, white, black and orange. Optional self-adhesive reflective sheeting provides international day and night identification.

2.2mtr Dia Buoys

2.2mtr Dia Buoys : a range of low maintenance, cost effective, small to medium sized polyethylene buoys for the marine navigation industry.

2.6mtr Marine Buoy

Pneumatic Fender 500m x 1000L

Fenders are composed of several rubber layers as well as reinforcement tire cord with strong durability, this enables fenders to be extremely resistant to pressure and shear and tear or any other external impact, In addition, Fenders with larger than 2.0 Dia are equipped with Safty valve to control fender's over pressure on operation by discharging air to outside but also to protect fender.

Additional Information:

• Item Code: 011
• Minimum Order Quantity: 03 Unit
• Pay Mode Terms: Advance
• Delivery Time: 4 to 6weeks

Lantern M550

Self-contained Lantern M550 leveraging custom optics, high-efficiency solar panels, and premium materials, this miniature solar LED marine lantern offers up to three times the range at half the size of its M502 predecessor. Now with replaceable, recyclable batteries this lantern provides excellent value and realiable operation for over five years.

Lantern M650H

The M650H Self-contained Lantern is a cost effective, self-contained, high-performance, low-maintenance and easy-to-install solar LED marine lantern. The M650H features a replaceable battery pack that extends the service life beyond five years, reducing the total cost of ownership.

Lantern M660

The M660 is a high-performance, long life, easy-to-use and cost effective self-contained solar LED marine lantern. The M660 features a Li-ion battery pack that extends the service life of the lantern up to eight years. M660 has four different mounting options and can be programmed and controlled with Bluetooth® Control.

Lantern M850

The Self-contained Lantern M850 combines a compact, high-efficiency solar engine with premium components and a rugged design for best-in-class performance at an optimal price. This costoptimized lantern is suitable for use in most solar locations and achieves up to 387 CD (IALA Peak) and over 7NM range.

Marine Lantern LED 155

Marine Lantern LED 155 is a general purpose LED lantern commonly used on both fixed and floating structures. The lantern is modular in design. It can be configured with two different vertical divergencies and 1-3 tiers depending on operational requirements.

Marine Lantern LED 160

This all-round LED 160 Marine Lantern has world-class optical performance with options for buoys and fixed installations. Three different lantern options available covering a range from 3 NM up to 12NM (Tc = 0,74).Standard IALA colours Red, Green, White, Yellow and Blue,Best in class optical performance,New designed rugged injection molded aluminium housing.

Marine Lantern LED 350 H

LED beacon capable of ranges up to 18 NM (Tc = 0,74) 30 NM (Tc = 0,85). Marine Lantern LED 350 H is designed to substitute rotating beacons with a considerably smaller power consumption. Up to 12.000 cd luminous intensity per tier at only 90 watts,Low power consumption, suitable for solar and battery operation

Hand held VHF Radio

We bring forth an impregnable range of VHF Radio. These are offered in a compact size and a ribbed grip, which ensures the strong grip of the radio in the user’s hand. The large display makes the text legible even under poor light. These are fitted with large tactile buttons and powerful sound. These radios are available with advanced attributes that makes it one of the most preferred product in the market.

HF Radio

We bring forth an impregnable range of HF Radio. This HF Radio is available in varied specifications such as 150W, 250W and 500W versions. These can be used for different vessels like a fishing vessel, supply vessel or large merchant vessel. Our radios have very clear reception and good frequency rates. This advanced radio can withstand the bumps and vibrancy of the vessels and can catch sound waves even in mid ocean.

Marine Antennas

Our company is highly acclaimed in offering a wide range of Marine Antennas. The huge gamut of marine equipment offered by us includes active receiver antennas, Omni-directional antennas. These antennas are very sturdy in nature and are resistant to ship vibrations and harsh wind loads, thus making them ideal for use in a salty environment. We offer these as per the latest standards set by the industry

Navtex Marine Equipment

We bring forth an impregnable range of Navtex Marine Equipment.Navtex is a system for the broadcast and automatic reception of maritime safety information by means of a narrow-band direct-printing telegraphy. Navtex provides shipping with navigational and meteorological warnings and urgent information through automatic printouts from a dedicated receiver

Satcom

Our magnificent assortment of marine equipment includes an outstanding variety of Satcom,that offer solutions as electronic equipment for maintaining uninterrupted communication. This brilliant device meets the requirements of diverse modern marine industries. Our range comes in varied specifications and also customized solution to meet diverse requirements. Our prices are most effective. These devices have the capability to offer asymmetric data rates that make them suitable for the Internet access applications. The high accuracy, compact designed device offers Short settling time.

Sound Power Telephones

We offer a comprehensive range of Sound Power Telephones that can operate with out a source of electric power for calling and talking point to point up to 700 meters. A call is originated by the services of magneto generator. This high technology operated system keeps the sea bound vessels in touch with other ships and land bound control rooms. Our range offers clear unmuffled sound.

Intercom System

Intercom System provide Camera that will be installed in the lobby, entrance connected through tele-security intercom system can be viewed in the flat.

• Colour TFT LCD monitor
• Large display size of 5.6 inch LCD
• Numeric display with back-lit
• nterface for door strike / door open

Talk Back System

The Talk-Back system is a command communication system based on one operator unit/panel, and a wide range of substations. The system is typically used to coordinate activities in a work group when it is important that the members in the group can hear all conversations.

Geomar B-130DB

Air Whistle, with electric remote control, for ships from 20 to 75 mts. In length, homologated under VA-15 (Spanish Govt Certification).

Air Horn With Solenoid Valve Box

Air Horn With Solenoid Valve Box

• 1. Volume : 130db / 1mm
• 2. Standard Body Color : Red - Amber - Blue
• 3. Material ( Horn PC)
• Protection Class : IP56

138 dB Ship1

Air Whistle, with manual control and electric remote control, with heating element 24V/220V, for ships from 75 to 200 mts. in length, homologated under number VA-16 (DNV Certification).

Pull Cord Switch

The Pull Cord Switch is an emergency switch used to stop the belt conveyor instantly when an accident occurs.When an accident occurs or for the normal corrective maintenance, workers can pull cord at any position along with the belt to stop the belt conveyor. It is widely used in various belt conveyor equipments for coal, cement and building materials, mining, electricity, port, metallurgy and chemical industries.

Speed Monitor

Including the application scope of the conveyor belts speed detector locked-rotor monitoring, motor running state monitoring, wind power generation device blade biggest revolutions surveillance and monitoring of motor, widely used in metallurgy, petroleum, electric power, mine, cement, building materials, bulk materials handling, water conservancy, chemical industry, packaging, food, food, textile, paper pulp and paper industry.

Belt Sway Switch

The Belt Sway Switch functions in detecting any deviation or sway in the conveyor belt and providing an auto-alarm and sending out signal to stop the conveyor to avoid the damage to the conveyor belt and prevent scatter of conveyed materials because of the belt distortion. Protection class is IP67, suitable for use in harsh environments. ? Built-in two groups of micro-switches to control the stop and alarm signal output. ? Transmission shaft is made of SUS304 materials with precision grinders, which can better maintain the waterproof feature and the saline-alkaline tolerance and the acid corrosion tolerance.

Belt tear detactore

When the belt is being tearing, rupturing, damaged at the junction or pushed out by sharp objects, the belt tear detector can monitor timely and send alarm signals accurately or turn off the conveyor in order to avoid the expensive conveyor belt to happen severe longitudinal tearing accident.
Conveying belt is an important part of the conveyor, which costs about 40% of the machine, but the belt tearing accidents have occurred occasionally. Once a serious accident happens, the whole belt with the value of more than one million may be totally destroyed. So the long-distance belt conveyor usually uses steel cord conveying belt to improve tensile strength, but the longitudinal tear resistance has not been improved, which could be a big risk.
Steel cord conveying belt is the main artery of the transportation of factories and mines. Occasional tearing accident will cause great economic losses. Foreign body scratches often occur at the lower part of the hopper, which are the most common types of belt damage.

Ballast Water Treatment System

Ballast Water Treatment system, neutralizes the seawater pollution so that the ballast water loaded into the vessel becomes disinfected. The method used for this process is the addition of NaOCl into the ballast water. Our system produces the NaOCl required by electrolyzing the incoming seawater.
(Performance standards for a bridge navigational watch alarm system (BNWAS) all items of equipment forming part of the (bnwas) should be tamper-proof so that no member of the crew may interfere with the system’s operation.
the bridge navigation watch alarm systems (BNWAS) must not be installed by crew. Exceptions can be made only for systems that are built with a specific way, approved by class, so that during installation, no system items are opened, and no cable connections are being made.

Baud Rates Converter

The Baud Rates Converter is a software version based on the successfully type approved IEC 60945 MCU5 hardware. The basic function of the system is receiving of NMEA telegrams with an adjustable baud rate from 4800 bps up to 38400 bps 8N1 and sending of these telegrams with a separately adjustable baud rate from 4800 bps up to 115200 8N1. With an additional parameter also the output frequency is alterable.

Data Logger With Compact Flash

The 1CF oIP / 2.5 Data Logger With Compact Flash module is a network-compatible control and recording module which includes an NMEA/RS422 interface, a bidirectional RS422/485 interface, a Compact Flash socket and an alarm output (potential-free). All operating states are indicated through LEDs. Protocols such as FTP and HTTP are available for download and service. With the help of a DIP switch, it is possible to set different baud rates for the RS422/485. With a DIP switch, different user applications may be selected as well.

Fuel Level Measurement

Precise measurement of fuel level. Temperature coefficient correction. Recording of every change. Full set of reports.

Hand Held Metal Detector

A Hand held metal detector is a portable electronic instrument which detects the presence of metal nearby. Metal detectors are useful for finding metal inclusions hidden within objects, or metal objects buried underground. They often consist of a handheld unit with a sensor probe which can be swept over the ground or other objects.

• With improved circuit design and round search-head Matex-B is a high sensitivity Hand frisker.
• Its capability of detecting small parts makes it ideally suited weapon search at high risk areasand forindustrialpilferage checks.

NMEA Telegram

The STIF A2D8 / 2.5 together with the software 1MWV CON used for conversion of the NMEA Telegram MWV for inverted notification in the wind direction (relative wind direction + 180°).

Search Light

We are comprehensively engaged in offering a wide range of Search Light. This range of search light is designed & developed using optimum grade raw material in strict compliance with the international quality norms and standards. In addition to this, the offered range is available in a number of customized forms, so as to meet the diverse requirements of clients.

Features:

• Easy to maintain
• Highly reliable
• Robust structures
• Highly sensitive to all metals

Serial Digital Converter

The Serial Digital Converter is based on the SLIF P2S32 module and has the capability of generating digital output from received serial NMEA data.

Speed Log Interface

The SLIF P2S3 / 1.5 Speed Log interface is designated to convert speed log information from pulses (200 or 400 pulses per miles) to NMEA telegrams and vice versa. The module expand one NMEA input to two NMEA outputs also it expand one pulse input to two pulses output. It also can be used for dual axial speed logs.

Steering Interface

Steering Interface for the installation of voyage data recorders (VDR), electronic sea charts (ECDIS) or various indications in the maritime sector. It also can be used for the acquisition of the analog and digital signals in measurement, monitoring and automation systems.

USB Serial Converter

The USB Serial ConverterSER is a converter from USB 2.0 to RS422 and vice versa. The device was designed to interconnect professional equipment like GPS or Speed Log to laptops or office computer. Operating power is supplied via the USB port. The RS422 interface is designed according to IEC61162-2 and is galvanic isolated from the USB port. The USB to SER can also use as ModBus to USB converter.

VDR S-VDR - Data Recorder

The VDR S-VDRcan record all mandatory signals in the capsule for at least twelve hours. Old data are deleted to make room for new. The same data, but for intervals up to some weeks, are recorded in the control computer and, on command, can be kept for as long as needed.

Water Proof Fluorescent Ceiling Light

We are one of the leading names, which is engaged in offering a wide and comprehensive assembly of Water Proof Fluorescent Ceiling Light. These products offered by us are suitably utilized in different areas such as braries, theaters, canteens, bars, cafeterias, restaurants, lounges, toilets, humid areas, cloakrooms, concert halls and consulting rooms. In addition to this, the offered range is appreciated among the customers, owing to its features such as alkali resistance, light weight and durability.

Waterproof Fluorescent Ceiling Light

Waterproof fluorescent ceiling light 2

Data Acquisition Unit

In this day and age of ever improving vessel performance, it becomes increasingly important to take full advantage of all the available data on board. The Acquisition Unit is the ultimate solution to acquire this relevant vessel data. The modular design is easily adaptable to the specific conditions of each and every vessel. The acquired data can also be sent, via the vessel's LAN, to the owner's office for further evaluation as necessary. the modules are DNVGL type approved in accordance with IEC 60945.

Electronic Display Board

Product Details:

• Module Resolution: As Per Customer Requirement
• Pixel Density: As Per Customer Requirement
• Viewing Angle: As Per Customer Requirement
• Power Consumption: As Per Customer Requirement
• Waterproof: Yes
• Language Supported: English, Hindi, Urdu, Telugu, Tamil, Gujarati, Malayalam, Punjabi
• Viewing Distance: As Per Customer Requirement

Bridge Navigation Watch Alarm System

The BNWAS was developed to detect the awareness of the officer of watch (OOW) to avoid accidents. In case the OOW is incapable, the system automatically generates several alarm stages. Due to its modular design it will be possible to suit on each dimension of vessel. The Bridge Navigation Watch Alarm System also have the capability to generates alarms at un-acknowledges alarms from nautical equipment.

Data Logger

Data logger system to collect, to store, to replay and to analyze a variety of signals. Due to the modular design it is possible to optimally adjust the system to any requirement to always get a customized solution.

Wind Speed and Direction System - Marine Equipments

The Walker 2050 uses a Combined Anemometer Cup & Vane Direction Sensor, the P296. This gives high accuracy in a robust compact package!
The sensor connects directly to a standard Walker DIN 144 wind speed & direction indicator, the P249, which gives digital displays of relative wind speed & direction. Wind direction is also displayed on a simulated analogue display by 72 LED´s.
True wind systems are available by using this sensor with the Walker P1066 True Wind Interface Unit.

Gyro Compass

We bring forth an impregnable range of Gyro Compass. This Master Gyro Compass is very useful for diverse needs of ships and boats. These master gyro compasses are quick setting, maintains free, low-power and minimum weight. Our compasses are ideal for small to large vessels. These offer ideal solutions like steering, position finding, and course recording. The Gyro Compass when used in combination with an autopilot can automatically lead the ship more precisely than a human helmsman.

Dry Suit

The Dry Plus suit differentiates between men and women and was conceived specifically for those who seek the performance of a highly reliable drysuit with the comfort of a soft boot -Outer lining: Poly Pk+ Lycra

• Inner lining: Fine Plush
• Zipper: DRY BDM in metal and protective flap
• Seams: blind stitching outside - Heat Tape inside
• Collar: Superstretch Neoprene
• Wrist closure system: Smooth aquastop
• Bag, hood, hose, and straps: included

Diving Fins

Dealer and supplier of Fins.

Oceanography

Now, with the boom in the oil and natural gas industry; we as a company have began to focus even UNDER the water - offering various products / components for the manufacture of ROV's (Remotely Operated Vehicles) and AUV's (Automative Underwater Vehicles) for Deep Sea Diving and for salvage operations.

Guru-A Diving Companion BCD Vests

Guru was studied, designed, and engineered for a mainly recreational user who is beginning to demand a bit more. More specifically, the SWS weight pocket system can hold up to 6 kg, while the roomy pockets with YKK zippers feature a knife slip and the backplate cover with anatomical inserts ensure the utmost comfort.Material outer bladder: PU coated 1000 D Cordura

• Material inner bladder: PU coated 1000 D Cordura
• Dump valves: 3 with pull commandv D-rings: 4 - 40 mm in stainless steel + 2 - 25 mm in stainless steel
• Dry weight (size L): 3700 g (complete with hose and weight pocket).

X-10 Pro Ice-Maximum Cold-Water Performance

The ideal regulator for dives in very cold waters. X-10 Ice Pro has an improved second stage case and deflector to obtain improved air flow that then ensures optimal performance. First stage materials: forged brass with shiny chrome finish

• Second stage materials: technopolymers, elastomers and ultralight alloys
• HP outlets:2
• outlets: 4 - 2 of which are inclined at 30.

Boss Technology Masks and Snorkels

Frame: Polycarbonate

• Skirt: hypoallergenic liquid silicone
• Strap: Silicone
• Lenses: tempered glass
• Packaging: rigid transparent case included

Pro 2000 HD-BCD Vests

It features the new Frame to Back Evolution system and, while maintaining its qualities of comfort and capacity to adapt to various body shapes unchanged, only now its even more intuitive, practical, and simple. The direct anchoring of the shoulder straps to the back plate is ensured in both the lower and upper part (on the later, through a horse-shoe system with 3 adjustments. Moreover, note the following features: the presence of a hidden back-up pocket on one side and the hidden seating on the other, the use of the ultra-technical fabrics that are lighter and more resistant, and finally the practical and functional Q&S weight system

Small Size Electronics Siren

• Compact and light weight product with High volume Buzzer Sound Output
• Compact and light weight product with High volume Buzzer Sound Output
• Small size product with beautiful appearance can be easily installed in a limited space.
• Buzzer type product which output strong signal sound of Max. 105db.
• Realizing strong buzzer sound with economic power by applying horn resonance structure.
• Volume : Max. 100db / m
• Material : ABS.
• Protection class : IP54

Electronic Hooter

High in Durability with Strong Steel Housing Employed
Water and dust proof(IP55) structure makes its outdoor installation

• Standard Body Color : RED
• Material : Steel Housing
• Protection Class : IP55

Electronic Siren

Standard product with clear sound tone that ensures accurate signal transmission even at a high-noise place
Water and dust proof(IP55) structure makes its outdoor installation
Possible to control volume level by using the built-in volume controller
Built-in warning sound, melody and alarm, each of which has 5 sounds and 3 voice signal channels

• Standard Body Color : RED
• Material : ABS Housing
• Protection Class : IP55
• Certificate : CE

Electric Bell

• Performing stable movement at vessel or large-scale plant where exists severe vibration and strong impact by adopting a special structure of striking solenoid bell.
• Transmitting plain and light alarm sound by adopting a bell housing made of material efficiant for sound transmission.
• Long durability under poor surroundings thanks to the structure strong against vibration and impact.
• Easy wiring and repair-maintenance due to the attached terminal box.
• Transmitting visual signal and audible signal simultaneously by the bell and pilot lamp.
• Bell and pilot lamp are interlocked but can be operated separately Bell/Lamp - Red
• Material : Bell-Steel, Housing(Body)- ABS.
• Protection Class : IP56
• Cable Entry : Standard-PF1/2 1EA, Custom Made-PF1/2 2EA.

Electric Motor Siren

• High durability and excellent in remote signal transmission due to high volume capacity
• Suitable for various types of cranes, vessels and fire warning systems
• Standard Body Color : RED.
• Material : DIECAST Al
• Insulation resistance : 100MΩ(at 500 VDC)
• Dielectric strength : 500VAC, 50/60Hz in 1 minute
• Material : Bell-Steel, Housing(Body)- ABS.
• Protection Class : IP44

Fire Fighting Hose Reel

• Preconnect or storage
• Powered rewind
• Saves time and space
• All hose sizes and types

LP Gas Hose Reel

• Delivery trucks
• Dispensing systems
• Filing stationary orportable cylinders
• Fueling vehicles

Petroleum Hose Reel

Home fuel delivery in plant and marine refueling
off road vehicle/equipment refueling

Pressure Washing Hose Reel

• Pressure washing
• Steam cleaning
• Maintenance washdown spraying

Pumper Cleaner Hose Reel

For sewer and pipe maintenance

Cabinet Double Hose Reel

• Install in one cabinet with Air Hose Reel & Cord Reel.
• Use conveniently one cabinet inside Air Hose Reel & Cord Reel.
• Excellent durability with long life spring.
• Stable take out of hose and cord by use 4way guide roller .
• Install Position: Wall, Ceiling( within 4MR).
• Use: Car Repair Center, Assembly Line, Industrial fields

Spring Rewind Hose Reel

• Exclusive Air Hose Reel with good and compact design.
• Optimized Model of small capacity and short length hose.
• Install by oneself with lightweight.
• Wide range of use with 120º rotation of left and right
• Excellent durability install with strong and high quality spring

Design & Structure

• Sturdy single pedestal reel with space saving design facilitates workplace organization
• Guide arm adjusts to wall, floor, vehicle & overhead positions

Applications

• General Industrial Applications
• Air SERVICES & TOOLS
• Assembly Operations
• Manufacturing Plants & Facilities
• Maintenance, Repair & Operations
• Automotive & Fleet Service Centers

Spring Rewind (Exhaust Hose Reel)

• Exhale them into the atmosphere through the plumbing connected after inhaling exhaust gas with high temperature.
• Excellent rewind apply strong electric motor.
• Protect damage of hose by limit system.
• Option : multipurpose muffler nozzle.
• Use: Vehicle workshop, gas station, training center, laboratory.

Spring Rewind Hose Reel

Design & Structure

Dual Pedestal Frame Construction

• Reels are all heavy duty, high strength steel construction and compact design
• All bolted assembly without welding.
• Dual frame, guide plate & ball bearing support and 4-way roller assembly.

Improved High-Demand Spring

• Long-life spring and special heat-treatment spring & non-corrosive ratchet

Full-Flow Shaft and Swivel.

• Maximize material flow with minimal pressure drop for faster fills.

Large Hose Capacity with Small Profile

• Compact pedestal and spool fits into tight spaces and can accommodate 10MR~30MR hose capacity.

Durable Finish

• All materials is carbon steel as standard(Stainless, Aluminum and other materials are available when you requested).
• Painting: powder coated for long life.

Application

• General service shops
• Manufacturing plants
• Municipalities and transits
• Construction equipment and fleet maintenance shops

Spring Rewind Hose Reel for Air

• Reels are all steel construction and compact design
• All bolted assembly without weldings
• Special heat-treatment spring & ratchet
• 4-way roller assembly
• Full flow shaft and swivel

Spring Rewind Hose Reel for Hydraulic

• Reels are all steel construction and compact design
• All bolted assembly without weldings
• Special heat-treatment spring & ratchet
• 4-way roller assembly
• Full flow shaft and swivel

Spring Rewind Reel for Oil, Air, Water, Grase etc.

• EN Series are fully enclosed & spring driven hose reel.
• Lightweight steel construction and attractive design.
• All bolted assembly without welding.
• Special heat-treatment spring & non-corrosive ratchet
• 4-way roller assembly.
• Full flow shaft and swivel.

Stainless Hose Reel For Hot & Cold Water

Spring Rewind

• Reels are all stainless steel construction with strong corrosion resistant
• Compact design with all bolted assembly without welding.
• Dual frame, guide plate & ball bearing support.
• Exclusive water reel for Food Company, facility of communal feeding.
• Special heat-treatment spring & non-corrosive ratchet.
• Wide usage with 120 degree swing.
• Standard inlet 90º balanced pressure swivel joint(NBR Packing).
• All(Outlet & Inlet) connection threads are female NPT.

Hose Reel for High Temperature & Steam

Design & Structure

• Reels are all stainless steel construction with strong corrosion resistant.
• Compact design with all bolted assembly without welding.
• Dual frame, guide plate & ball bearing support.
• Exclusive water reel for Food Company, facility of communal feeding.
• Special heat-treatment spring & non-corrosive ratchet.
• Wide usage with 120 degree swing.
• Standard inlet 90º balanced pressure swivel joint(NBR Packing).
• All(Outlet & Inlet) connection threads are female NPT.

High Temperature Hose Reel

Design & Structure

• Reels are all stainless steel construction with strong corrosion resistant.
• Compact design with all bolted assembly without welding.
• Dual frame, guide plate & ball bearing support.
• Exclusive water reel for Food Company, facility of communal feeding.
• Special heat-treatment spring & non-corrosive ratchet.
• Wide usage with 120 degree swing.
• Standard inlet 90º balanced pressure swivel joint(NBR Packing).
• All(Outlet & Inlet) connection threads are female NPT.

Portable Hose Reel

Specifications: Manufacture with portable cart type for moving bulk rewound hose . It’s easily moving by cart with heavy weight. It’s stably moving at off-road by installed 10 inch caster.

Manual & Power Rewind Reel

• Drum type hose reel for Jet Refueler & Refueling Vehicle
• Standard Rewinding Speed :20MR/min
• Working Voltage : DC12V/24V(Available Change)

Manual Rewind Hose Reel for Air , Water & Press Wash

• Lightweight steel construction, compact design.
• Permanent direct crank rewind.
• Full flow shaft and 3/8" swivel brass Joint.
• Standard inlet 90° balanced pressure swivel joint(NBR Packing)
• All(Outlet & inlet) connection threads are female NPT(Other threads can be furnished when you requested).
• All materials are carbon steel as standard(Stainless, Aluminum and other materials are available when you requested).
• Mount reel to wall, workbench or vehicle with ease.

Manual Rewind Reel Fuel Dispensing Hose Reels

• Manual Rewind Reel Fuel Dispensing, Chemical Transfer, etc.
• Heavy duty steel construction reels designed for long lengths of hose.
• Permanent direct crank rewind.
• Roller guides are option (Specify roller position when ordering.)
• Brake System: cam-lock drag brake or spring actuated pin lock(Supplied with spring actuated pin lock as standard).
• Brake System: cam-lock drag brake or spring actuated pin lock(Supplied with spring actuated pin lock as standard)
• Full flow shaft and swivel.

Manual Rewind Reel Fuel Dispensing Hose Reels

• Manual Rewind Reel Fuel Dispensing, Chemical Transfer, etc.
• Heavy duty steel construction reels designed for long lengths & large hose reel
• Supplied without handle, Rewind by wheel.
• Roller guides are option (Specify roller position when ordering.)
• Brake system is Supplied with spring actuated pin lock as standard
• Full flow shaft and swivel.
• Standard inlet 90° balanced pressure swivel joint(NBR Packing).

Welding Cable Reel

Design & Structure

• Reels are all steel construction and compact design.
• All bolted assembly without welding.
• Dual frame ,guide plate & ball bearing support.
• Special heat-treatment spring & non-corrosive, non-sparking ratchet
• 4-way guide roller assembly. Roller position must be specified.
• Quick connection to your welder.
• 400amp rated slip ring.
• All materials are carbon steel as standard(Stainless, Aluminum and other materials are available when you request) .
• Other specifications are available.

Reel for Crane

Design & Structure

• Heavy duty steel construction and without frame.
• Full flow shaft and swivel(multi line).
• Available Hose:Synflex hose.
• Special heat-treatment spring & without ratchet(Constant tension)
• All (Outlet & inlet) connection threads are female NPT(Other threads can be furnished when you requested)
• All materials are carbon steel as standard(Stainless,Aluminum and other materials are available when you requested).
• Crane hose reels are furnished standard with synflex hose.
• Other specifications are available .

Multiple Hose Reel

Specification

• Integral Type duplex with Hose Reel and Cable Reel.
• Working hydraulic pressure with electric power and signal cable simultaneity.
• Create various effect with one Reel.
• Apply power spring for smooth working at high pressure
• The cable have penetrated into hose for save cable

Storage Reel

Specification

• SR3000 Series are non-contacting cable reel for AUDIO & VIDEO.
• Distinguished 3 Type of SR30C, SR30R, SR30T by INLET connect type
• Excellent Rewind capacity by strong DC Motor. DC Motor is installed inside of the reel
• Installed safety cover of chain gear for prevent safe accident
• Provide detachable handle basically

Power Rewind Hose Reel

• Guide Roller can move up and down according to draw out hose direction.
• Efficient space application by compact design.
• Excellent Rewind capacity by strong DC Motor
• Make better use of space
• Apply Manual handle of Bevel Gear Type.

Fire Fighting Hose Reel

• Using quickly and at once go draw out hose 100MR from reel without other connect hose.
• Rewind hose by strong DC Motor after using..
• Drain reaming water in hose during rewind hose.
• Excellent durability of POWER DC MOTOR
• Apply Manual handle of Bevel Gear Type.

Power Rewind Hose Reel

• For power transfer using spur gear instead of chain gear.
• Efficient space application by use spur gear.
• No danger for safe accident with no using chain.
• Excellent Strong DC Power Motor.

LPG Gas Hose Reel

• Use conveniently by roller guide of left and right turn with hose direction.
• Apply explosion proof motor of prevent explosion as using high pressure LPG Ga.
• Apply 1.5 inch swivel Joint & 1 inch Shaft for supply hydraulic fluid smoothly.
• Apply swivel Joint for excellent air tightness.
• Apply #40 chain for transfer strong power & Manual handle of Bevel Gear Type.

Power Rewind Cale Reel

Specifications:

• Auto aligner of Hose : Prevent for twister, stumble or lean of Hose.
• Excellent Rewind capacity by strong DC motor.
• Excellent conductivity Carbon Blush.
• Apply swivel Joint for excellent air tightness.
• Chain Cover : Installed safety cover of chain gear for prevent safe accident.
• Usage: OB Van. Generator Truck, Firefighting Truck & Special Vehicles.

Argon Welding Cable Reel

Design & Structure:

• Reels are all steel construction and compact design.
• All bolted assembly without welding.
• Dual Frame, guide plate & ball bearing support.
• Special heat-treatment spring & non-corrosive, non-sparking ratchet.
• 4-way guide roller assembly. Roller position must be specified.
• Quick connection to your welder.
• For use with single conductor electrode cable or grounding lead.
• 400amp rated slip ring.
• Declutching arbor is provided to prevent damage from reverse winding.
• All materials is carbon steel as standard. ( Stainless, Aluminium and other materials are available when you request).

Specification :

• Can be control Argon and Tig welding cable by one reel.
• Increase usability and easy control workings.
• Facilitate by custom made according to working place or usage.

Self-Retracting Hydraulic Hose Reel for Crane

Design & Structure:

• Heavy duty steel construction and without frame.
• Full flow shaft swivel(multi line).
• Available Hose:Synflex hose.
• Special heat-treatment spring & without ratchet(Constant Tension).
• All (Outlet & Inlet) connection threads are female NPT( Other threads can be furnished when you requested)
• All material are carbon as standard. (Stainless, Aluminum and other materials are available when you requested).
• Crane hose reels are furnished standard with synflex hose.
de according to working place or usage.

OL800 Solar LED Obstruction Lights

The Ol800 Meets The Icao Requirements For Low-intensity Obstacle Lights Type A And Type B, According To Icao Annex 14, Volume 1, 5th Edition, July 2009 And 6th Edition, July 2013 (red).

The New Benchmark For Low-intensity Solar Led Obstruction Lighting In An Easy-to-install, Low-maintenance Package. Available In Three Engine Sizes And Includes New User-friendly Features

OL32 Solar LED Obstruction Light

The new benchmark for low-intensity solar led obstruction applications in an easy-to-install, low-maintenance package.

• automated dusk to dawn operation
• visible and ir modes available
• proven technology platform

Explosion Proof Low Intensity LED Aviation Obstruction Light

• Low Intensity B type Explosion Proof aviation obstruction light
• Features high visibility from a distance with the direct LED light distribution system
• Cost savings enabled by using a long lasting LED light source which eliminates the need for maintinence
• Aluminum housing provides excellent durability
• Terminals located inside the housing for wiring
• Protection rating : Ex d ⅡC T4, IP66

Low Intensity Aviation Light

AVIATION POWER SYSTEMS warning lights are compact,sturdy,power saving LED low intensity lights available with optional advanced feature.

• ICAO (Type A/B) compliant product desigand performance.
• Omni directional low intensity light (>50 cd).
• Aviation RED light source,hence no requirement of filters that face quickly.
• Extremely energy efficient system.
• LED light source with a life exceeding 100,000 hours.
• Designed to operate under hard climatic conditions.

Medium Intensity Aviation Light

ICAO (Type B/C,annexure 14) compliant product design and performance. Multidirectional medium intensity aviation RED light source hence no requirement of filters that fade quickly.

• Remote failure monotoring for LED failure.
• Extremely energy efficient system (consumes less power than conventional light warning system 35 watts max).
• High power solid state lamp sourced from world’s best source with expected life of >100,000 burning hours.

High Intenstity Aviation Light

High intensity aviation warning light is used for aircraft safety for 80 mtrs and above as per ICAO, FAA guidelines.

• Patented design
• Casing made of die cast aluminium body, red powder coated
• UV stabilized optical lens for 360° illumination
• Conforming to ICAO/FAA Standards
• Inbuilt Photocell
• Special grade through secondary optical lens

NMEA Expander Channel

Our company is highly acclaimed in offering a wide range of 1NMEA To2_2 - NMEA Expander Channel. The 1NMEA to2_2 is designated for the distribution from one serial data source (NMEA) to max two receivers (RS 422 or NMEA). This function is twice available (2x (1 input + 2 outputs)). The two NMEA inputs of the module are separately scheduled with help of switch S1 and galvanic isolated from the power supply and the outputs.

NMEA Expander

Our company is highly acclaimed in offering a wide range of NMEA Expander. The 2NMEA to12 is designated for the distribution from two serial data source (NMEA) to maximum 12 receivers (RS 422 or NMEA). The two NMEA inputs of the module are separately assignable to the multiple outputs with help of jumpers and galvanic isolated from the power supply and the outputs.

Selector Device

We bring forth an impregnable range of Selector Device. The VL-SDN is used for redundant NMEA distribution. With its 2 galvanic isolated NMEA inputs the board can select automatically between both inputs to forward them to the 12xRS422 and 2xRS232 outputs. If one input is missing, the module will switch over to the second one automatically. A possibility to switch over manually is also included. Due to its 2 power inputs 9-32VDC also the power source is redundant

NMEA To Ethernet Converter

This NMEA to Ethernet Converter is used to collect 8 NMEA serial lines from different sources and convert them to one output per Ethernet TCP/IP or Ethernet UDP. Furthermore a additional RS422 NMEA output is available. All 8 NMEA inputs are galvanic isolated to each channel and to the output. In case of system failure alarm will be generated and can be send via RS422 or dry contact. A filter function can be activated.

Machine Conditioner

• Vibration Measurement
• Laser Tachometer measurement
• Infrared Temperature measurement
• Current Clamp measurement
• Electronic Stethoscope
• Suitable for monitoring machinery vibration caused by
• Suitable for monitoring machinery vibration caused by imbalance, misalignment & gear faults
• Micro controller based

Digital Motor Checker

Insulation Resistance (IR) Measurement. Identify open and short circuits/ loose connections in a winding coil. Identify interterm shorts. Detect Rotor bar problems without dismounting the rotor. Inductance of the winding with respect to different positions for rotor for detecting blow holes or cracks in the rotor bars. Simple operations, accurate & quick assessment of motor condition. Shock proofed rubber casting Low battery indication.

Analog Motor Checker

A portable diagnostic tool for Electrical Engineer and is used for quick on site checks of electric three-phase machines.

A reduction in machine performance, such as inefficient operation or tripping of overloads, may indicate mechanical or electrical faults. If the fault is electrical, will immediately detect it, without having to dismantle the equipment.

It may also be used to check quality and condition of motors which have been in storage before they are installed.

The instrument has three separate operating modes to measure different types of fault like fully insulation, open circuits / loose connections, short circuits and rotor defects. Motor insulation is tested with a high voltage of 500V DC supplied by the instrument.

Bearing Analyzer

We Present a small Micro Processor based diagnostic tool for comprehensive condition analysis of rotating machinery. Objective measurements of machine condition are needed as a reliable base for preventive maintenance. Now maintenance personal can analyze bearing condition, measure machine vibration and check rotational speed - with a single and easy to use instrument. The best way is to periodically monitor bearing condition and replace the bearing at the right time by least influencing the production efficiency.

FEATURES:

• Direct indication of machine condition in terms of good – reduced – bad in condition scale
• Detect mechanical condition of bearings
• Damage severity readings of bearings
• Detecting lubrication condition of ball-and-roller- type Bearings
• Non-contact measurements of rotational speed
• Vibration Measurements according to ISO recommendations

Portable Search Light Model-dl 50 S

• MODEL- DL 50-S
• Type - Standard
• Controls - Direct switching
• Charger - External - standard
• input- 200-250 v
• Run in- 70 min full bright
• format- 55 w portable -reechargeable hand held search light for safety securtity surveillance power- 12 V, 55 watt. high efficiency parabolic reflector.
• Range- capable of illuminating up to 1KM Charger time- 10-12 hours for full charging weight- 4 kg with battery

Mini Light Bar

Mini Light Bar, Rohmbus Shape

Heavy Duty Electric Bell

• Performing stable movement at vessel or large-scale plant where exists severe vibration and strong impact by adopting a special structure of striking solenoid bell.
• Transmitting plain and light alarm sound by adopting a bell housing made of material efficiant for sound transmission.
• Long durability under poor surroundings thanks to the structure strong against vibration and impact.
• Easy wiring and repair-maintenance due to the attached terminal box.
• Transmitting visual signal and audible signal simultaneously by the bell and pilot lamp.
• Bell and pilot lamp are interlocked but can be operated separately.
• Bell Volume : 90±5dB At 1m
• Standard Color : Housing(Body)-Manufacturer's Standard Color Bell/Lamp - Red
• Material : Bell-Steel, Housing(Body)- ABS
• Protection Class : IP56
• Cable Entry : Standard-PF1/2 1EA, Custom Made-PF1/2 2EA

Wall Mounting Heavy Duty Siren

• Heavy-duty product of aluminum housing type which is suitable to transmit signal for vessels, iron mills and outdoor plants.
• Water and dust proof(IP56) structure makes its outdoor installation
• Can select one of wall mounting, self-standing and termal box attachment types, all of which are same in specifications, which is most suitable for installation
• Possible to control volume level by using the built-in volume controller
• Possible to built-in special warning sounds for vessel
• Standard Body Color : MUNSELL NO. 7.5BG 7/2
• Horn Housing Standard Color : RED
• Material : Body-DIECAST Al, Horn Housing-SUS316L
• Material : Bell-Steel, Housing(Body)- ABS
• Wall Mounting Product
• Certificate : CE, KIMM, ABS
• Protection Class : IP56
• Volume : Max.118dB/m Ø125mm

Self Standing Heavy Duty Siren

Water and Dust-proof(IP56) Heavy-duty Aluminum Housing Product with High Sound Volume

• Heavy-duty product of aluminum housing type which is suitable to transmit signal for vessels, iron mills and outdoor plants
• Water and dust proof(IP56) structure make possible its outdoor installation
• Can select one of wall mounting, self-standing and termal box attachment types, all of which are same in specifications, which is most suitable for installation
• Possible to control volume level by using the built-in volume controller
• Possible to built-in special warning sounds for vessel
• Self standing type product
• Standard Body Color : MUNSELL NO. 7.5BG 7/2
• Horn Housing Standard Color : RED
• Material : Body-DIECAST Al, Horn Housing-SUS316L
• Wall Mounting Product
• Certificate : CE, KIMM, ABS
• Protection Class : IP56
• Volume : Max.120dB/m

Heavy Duty Siren With Terminal Box

Water and Dust-proof(IP56) Heavy-duty Aluminum Housing Product with High Sound Volume

• Heavy-duty product of aluminum housing type which is suitable to transmit signal for vessels, iron mills and outdoor plants
• Water and dust proof(IP56) structure make possible its outdoor installation
• Can select one of wall mounting, self-standing and termal box attachment types, all of which are same in specifications, which is most suitable for installation
• Possible to control volume level by using the built-in volume controller
• Possible to built-in special warning sounds for vessel
• Wall mounting product
• Standard Body Color : MUNSELL NO. 7.5BG 7/2
• Horn Housing Standard Color : RED
• Material : Body-DIECAST Al, Horn Housing-SUS316L
• Wall Mounting Product
• Certificate : CE, KIMM, ABS
• Protection Class : IP56
• Volume : Max.120dB/m

Explosion- Proof Alarm Bell

Explosion-Proof Alarm Bell

• Performing stable movement at vessel or large-scale plant where exists severe vibration and strong impact by adopting a special structure of striking solenoid bell.
• Transmitting plain and light alarm sound by adopting a bell housing made of material efficiant for sound transmission.
• Suitable for the places where always exists salt like vessel and shipbuilding yard, and such places as steel plant and outdoor crane where is inferior in their environment
• Bell and pilot lamp are interlocked but can be operated separately.
• Bell Volume : 90±5dB At 1m
• Standard Body Color : MUNSELL NO : 7.5 BG 7/2
• Material : Body-Diecast Al, Bell-Steel
• Frequence : 400~600Hz
• BELL Volume : MAX. 90dB/m
• Protection Class : ExdCT6, IP56

Explosion- Proof Alarm Bell

External Diameter 130mm, Structure of Striking Bell Housing, Generates Plain and Light Alarm Sound

• Performing stable movement at vessel or large-scale plant where exists severe vibration and strong impact by adopting a special structure of striking solenoid bell.
• Transmitting plain and light alarm sound by adopting a bell housing made of material efficiant for sound transmission.
• Long durability under poor surroundings thanks to the structure strong against vibration and impact
• Easy wiring and repair-maintenance due to the attached terminal box.
• Transmitting visual signal and audible signal simultaneously by the bell and pilot lamp.
• Bell and pilot lamp are interlocked but can be operated separately
• Bell Volume : 90±5dB At 1m
• Standard Color : Housing(Body)-Manufacturer's Standard Color Bell/Lamp - Red
• Material : Bell-Steel, Housing(Body)- ABS
• Protection Class : IP56
• Cable Entry : Standard-PF1/2 1EA, Custom Made-PF1/2 2EA

LED Warning Light

LED Warning Light

Water-Proof Limit Switch-Roller Lever

SLP2130-RL Aluminum Housing

• Excellent functioning in precision instrument due to its minute operation.
• Our independent system, strong returning system with double springs was taken for this item, so it maintains its stable motion after switching on for a long time.
• Stainless(SUS) bolts and nuts used outside have a strong anti-corrosion.
• Suitable for pharmaceutical factory, food processing machine, washing device, marine engine room, cement factory and outdoor facility.
• Standard body color : MUNSELL NO. 5.0
• Material : Body-DIECAST Al, Bolts & nuts-SUS, Roller-POM
• Protection class : Water-proof, Oil-proof, Dust-proof (IP67)
• Certificate : KIMM
• Custom-made for cold-proof type(-40???~ 40???), heat-resisting type( 50???~ 120???)

Explosion-Proof Limit Switch - Roller Lever

• Having water-proof sturucture without the use of adhesive or molding, this item provides a high sealed quality and excellent safety.
• Our independent system, strong returning system with double springs was taken for this item, so it maintains its stable motion after switching on for a long time.
• Product of strong anti-corrosion by using stainless(SUS) bolts and nuts.
• Suitable for dangerous places such as petrochemical plant, powder plant, oil tanker.
• Standard body color : MunicipalitiesSELL NO. 5.0
• Material : Body-DIECAST Al, Bolts & Nuts-SUS, Roller-POM.
• Protection class : Exd II CT6, IP67
• Certificate : KIMM, KOSHA
• Custom-made for cold-proof type(-40???~ 40???), heat-resisting type( 50???~ 120???)

Water Protection Box

QBOX-S

• With the material of Bronze Die Cast housing, this item provides long mechanical lifespan and excellent corrosion resistance.
• Having water-proof sturucture of Neoprenn gasket, this item provides a high sealed quality and excellent safety.
• Water-proof type, Dust-proof type.
• Suitable for marine deck machine, heavy industrial machine, outdoor plant equipment.
• Protection class : IP67

Warning Light

Product of Emitting Bulb Light by Revolving Round Reflector

• Bulb reflector revolving type.
• In case of product using AC voltage, switch for voltage selection between 110 and 220V is built-in.
• Employing built-in controller for revolving speed volume.
• Revolving Speed : 120~140RPM.
• Possible to be equipped with protection cage(option) that protect the globe from outside touch
• Standard Body Color : MUNSELL NO. 7.5BG 7/2
• Material : Lens-PC, Body-DIECAST AL, Protection cage-SUS316L.
• Lens Color : R-Red, A-Amber, G-Green, B-Blue.
• Certificate : CE, KIMM, ABS.
• Protection Class : IP56.
• The above photo is a standard product unequipped with its own protection cage which is optional.
• The photo includss flexible connector No.16. Cable gland for vessel is available on demand.

Streamline LED Revolving Warning Light

Power LED Type of High Brightness, Suitable for Emergency Vehicle and Motorcycle etc

• LED revolving warning light employing Power LED of high brightness with semi-permanent lifespan.
• Low power consumption by using POWER LED but securing same or higher brightness than bulb applied product (Applying 3W Power LED).
• Excellent visibility by employing multi-faceted reflector.
• Long lifespan by employing a special power transmission system minimizing noise and wear.
• Revolving Speed : 120~140RPM
• Material : Lens-PC, Body-PC, Reflector-PC/li>
• Protection Class : IP54.

Multiple Colors 1 Layer LED Tower Light

Product Details:

Voltage- 230Ac, 12vdc, 24vdc
Light Block Color- Green, Yellow, Red, Blue

Transmit 2~3 Colors Signal by Using 1 Layer Tower Light

• Economical product that can transmit 2 to 3 colors signal by using 1 layer tower lamp.
• Suitable for small machine or FA machine for which installation height is limited.
• Ensuring high visibility from a distance by employing special reflector that effectively accumulates LED light and emits a concentrated signal light like it in filament.
• Employing a special filter that considerably improves the main disadvantage of LED, low visibility at a bright place.
• Standard Color ( R-Red A-Amber , G-Green)
  2 Colors : R-Red G-Green
  3 Colors : R-Red A-Amber G-Green
• Flashes : 60~80/min
• Volume(Buzzer built-in Type) : Max 90dB/m (2 Buzzer Sound Type is custom made)
• Material : Lens-AS, Body-ABS, Pole-Al
• Certificate : CE

Multiple Colors LED Semi-Cylinder Tower Light Wall Mounting

Easily Attached to Walls as Wall Mounting Type Product and Reduced in the Risk of Damage from Touching by Obstacle

• Wall mounting LED steady/flashing light and easily to installed onto wall.
• As a semi-cylinder wall mounting type, reducing the risk of damage from touching by obstacle.
• Attractive appearance by adapting cover vacuum-plating and it upgrades the machine.
• Radiating LED light directly toward product user by expanded window, ensuring high visibility even from side direction.
• Transmitting 2~3 colors signal through one window by using multi-colored LED
• Suitable for the place where bulb change is difficult or strong vibration and impact exists
• Possible to be used outdoor as waterproof and dust-proof structure ensures excellent airtightness
• Standard Color( R-Red, A-Amber, G-Green)
  2 Colors : R-Red G-Green
  3 Colors : R-Red A-Amber G-Green
• Material : Lens-PC, Body-ABS, Cover-ABS
• Protection Class : IP55, Possible to use outdoor
• Flashes : 60~80/min.
• Volume(Buzzer Built-in Type) : 90dB/m. (2 Buzzer Sound type is custom made)

Ship Warning Light

Large Ship Warning Light, Reflector Revolving Warning Light for Vessel.

• Bulb reflector revolving type
• In case of product using AC voltage, switch for voltage selection between 110 and 220V is built-in.
• Employing built-in controller for revolving speed volume.
  Revolving Speed : 120~140RPM
• Easy wiring and maintenance due to the terminal box equipped with.
• Possible to be equipped with protection cage(option) that protect the globe from outside touch.
• Standard Body Color : Munsell NO. 7.5BG 7/2.
• Material : Lens-PC, Body-DIECAST AL, Protection cage-SUS316L.
• Lens Color : R-Red, A-Amber, G-Green, B-Blue.
• Protection Class : IP56.

Large Size Warning/ Signal Light

Supplier of large size warning/ signal light.

Heavy Duty LED

• Warning light and electric horn combinations for vessels and heavy industrial applications
• Excellent omni-directional visibility with LED light collecting system and special multifaceted reflector
• Light weight model with special polycarbonate (PC+GF) housing
• Excellent hermetic structure that blocks water and dust
• Superior impact and shock resistance
• Prevents damage from external contact with recessed horn structure, high volume output possible with the extended length of the horn housing
• Easy wiring and sound control with the terminal box attached on the side of housing
• Standard model comes with a protection cage equipped
• Can select a variety of light sources and sound pattern combinations
• Can adjust sound volume and select sound pattern with the switches built inside the units
• Materials : Lens-PC, Housing-PC+GF, Protection cage-STS316L, Reflector-PC
• Cable entry : 1/2″PF

Electronic Hooter

Product Details:

Minimum Order Quantity- 05 Unit
Usage- industrial use
Power Source- DC/Battery
Sound Level (dB)- 100
Voltage (V)- 12V or 24V
Ip Rating- 55
Color- red
Material- Housing-Steel Horn housing -Steel
Brand- Korean
Korean- 1year
Supply Voltage Type- DC
Condition- New
Weight- 0.88kg

• 1 warning sound and cost effective model for DC only
• Water and dust proof(IP55) structure makes its outdoor installation
• Materials : Housing-Steel, Horn housing -Steel
• Housing standard color : Red
• Ambient operating temperature : -25°C to +50°C
• Protection Class : IP55

Obstruction Tower Light

Obstruction Tower Light Suitable for Tower Crane, Runway and Iron Tower have some given features.

• Employing LED of high brightness as light source, have maximum 5 years lifespan in case of operating 12 hours per day(about 25 times of bulb)
• Because of high efficiency of converting electricity into light, LED is lower in power consumption and more economical than bulb of same capacity(Bulb :100W LED : 25~50W)
• Easy to maintain, check and replace LED radiation system because it consists of separate units(parts)
• Possible to make the sun switch system which automatically detects the condition of darkening
• Body standard Color : RED
• Insulation Resistance : 100MΩ (at 500 VDC)
• Dielectric Strength : 500VAC, 50/60Hz in 1 minute
• Material : Housing-diecast AL(Body-diecast AL), Lens-PC(Lens-PC)
• Protection Class : IP56

Signal Light

• Economical product that can transmit 2 to 3 colors signal by using 1 layer tower lamp
• Ensuring high visibility from a distance by employing special reflector that effectively accumulates LED light and emits a concentrated signal light like it in filament

Warning LED Signal Light

We are leading supplier of Warning LED Signal Light - LED steady/flashing.

LED Obstruction Light

LED Obstruction Light has several features and some of them are following.

• Employing LED of high brightness as light source, have maximum 5 years lifespan in case of operating 12 hours per day(about 25 times of bulb).
• Because of high efficiency of converting electricity into light, LED is lower in power consumption and more economical than bulb of same capacity.
• Protection Class : IP56

LED Spreader Light

LED Spreader Light has the given some of the following Features.

• Suitable for signal transmission for container spreader, port industry and various transport equipments used outdoor.
• Excellent durability even under super vibration and impact due to the structure excluding assembly but molding all parts.
• Adapting specially designed lens to prevent user from the misunderstanding a reflected light by sunshine as signal light(KW Type).
• Light color combination can be judged by buyer.

LED Tower Lamp

LED Tower Lamp Transmit 2~3 Colors Signal by Using 1 Layer Tower Light.

• Economical product that can transmit 2 to 3 colors signal by using 1 layer tower lamp.
• Ensuring high visibility from a distance by employing special reflector that effectively accumulates LED light and emits a concentrated signal light like it in filament.

LED Work Light

• LED Work Light of low power consumption and low cost
• Power LED applied product and suitable for a workshop where requires high brightness
• Suitable for the environment where requires presiseness and accuracy such as precision apparatus and through overhaul
• Similar lighting function to sunshine and neither ultraviolet rays nor infrared rays.

Signal Stack Light

Big tower light which emits strong signal light.

Standard Flashing Warning / Signal Light

Product Details:

• Lighting Type- LED
• Lighting Color- Green

We bring forth an impregnable range of standard flashing warning / signal light. This marine and electrical and mechanical equipment is ideal for getting a steady/flashing, high-brightness led type illuminator. These products offer critical lighting solutions and are offered in diverse specifications, as per the requirements of our clients. We offer these lights at market leading price range.

Warning Light And Souder

There is some of the following feature of the Warning Light And Souder.

• As the combination of water-proof,anti-corrosion warning light and siren, it has high durability and high air tightness
• Protection Class : IP56

Warning Light With Siren

Signal sound built-in product of direct mounting type with LED steady/flashing warning light and horn integrated. Simultaneously transmitting visual signal and audible signal. Light product employing polycarbonate(GF30) housing with long durability and high anti-corrosion. Suitable for the places like vessel and shipyard where moisture or salt permanently exists, for the places like iron or steel mill where environment is inferior and for outdoor crane etc.

Panel Type Electronic Siren

Panel Type Electronic Siren

Motor Siren - Heavy Duty Motor Siren

Motor Siren - Heavy Duty Motor Siren

Explosion Proof Led Revolving Warning Light-Standard Size

• Bulb reflector revolving
• LED reflector revolving
• LED steady/flashing

High brightness LED reflector revolving warning light.
Explosion-proof class : KIMM, KOSHA, NEPSI - Exd IICT6, IP66
ATEX - II 2G Exd IIBT6, IP66

Standard Revolving Warning / Signal Light

Our company is highly acclaimed in offering a wide range of Standard Revolving Warning / Signal Light. These lights have superior visibility by adapting Power LED and multifaceted reflector. Our lights are incorporated with a special power transmission system for lowering noise and wear and tear. As a special precaution, in case of product using AC voltage, switch for voltage selection between 110V and 220V is built-in.

LED Flashing Light

LED Steady/Flashing type of high brightness
Having built-in steady/flashing selection switch
Semi-permanent in the lifespan of light source and suitable for machines having strong vibration and impact
Buzzer is applicable
Volume(Buzzer Built-in Type) : Max 90dB/m (2 Buzzer Sound type is custom made)
Material : Lens-PC, Body-ABS, Reflector-Heat Resistant ABS
Lens Color : Red, Amber, Green, Blue
Protection Class : IP44

LED Revolving Reflector Warning Light

• LED revolving warning light employing Power LED of high brightness with semi-permanent lifespan
• Excellent visibility by employing both multi-faceted reflector and special reflector
• Employing a special power transmission system minimizing noise and wear
• AC Voltage Product has built-in switch for selection of 110V/220V
• Speed volume controller is built-in
• Revolving Speed : 120~140RPM
• Easy installation by mounting bracket equipped with
• Material : Lens-PC, Body-SUS304, Reflector-Heat Resistant ABS
• Lens Color : Red, Amber, Green, Blue
• Protection Class : IP44

Explosion Proof

LED Strobe Light For Heavy Equipment

LED 155 EX LED Lantern

LED 155 EX is a LED lantern commonly used on offshore platforms. The lantern is maintenance free, compact and robust in design. LED 155 EX is modular and can be delivered with up to 3 tiers.Range up to 8 nm atTc = 0.74 (12 at Tc = 0.85)

• ATEX category Zone 1 and Zone 2
• Standard IALA colours Red, Green,White and Yellow
• Rugged aluminium housing
• Extremely low power consumption, suitable for solar and battery operation
• Integrated flasher with a day light switch and an 8 Ampere solar panel charger
• Adjustable intensity and range
• Available with narrow (6°) or wide (10°) vertical divergence
• Programming with Sabik Mk2E portable programmer
• Cable synchronization between light units

LED 350 EX LED Light

LED 350 EX
High intensity LED light for offshore installations
LED 350 EX is a high performance omni-directional LED beacon.
The lantern is maintenance free, compact and robust in design.
The lantern can be supplied with up to three tiers. A 1-tier LED 350 EX has a range of 10 nm.

• With 3 tiers range up to 12,5 nm at Tc = 0,74 (18 nm at Tc = 0,85)
• ATEX category Zone 1 and Zone 2
• Standard IALA colours Red, Green, White, Yellow
• Rugged aluminium housing
• Extremely low power consumption, suitable for solar and battery operation
• Integrated flasher with a day light switch and an 8 ampere solar panel charger
• Field adjustable intensity and range
• Programming with Sabik Mk2E portable programmer
• Cable synchronization between light units

SFH 6 EX Fog Signal

SFH 6 EX Fog Signal is a 2 nm audio signal. The Fog Signal is a new development, compact and lightweight unit designed for marine applications. The Fog Signal is equipped with six compressor drivers and with an integrated power amplifier.

• Signal range 2 nm
• Output 133,2 db at a frequency of 664 Hz
• Corrosion resistant aluminium housing
• Suitable to be powered with solar energy and a battery system
• Maintenance free design
• As standard delivered with Morse U 30 sek audio signal, on request other characters
• Used on fixed offshore structures, oil/ gas platforms, offshore wind farms, FSO and FPSO tankers
• Can be installed together with a fog detector

Solar Equipment Support Structure

Product Details:

Material- Stainless Steel

The Support structure is a custom specific product that can be designed according to customers needs. The structure is used as a single lift self-contained aids to navigation package powered by a battery and a solar panel. The configuration of the Support structure depends on the installed equipment. The most common structure is equipped with following ATEX approved components:

• Lantern, solar panel, battery/battery box and a junction box for cable connections, also fog horns can be installed on support structures
• lanterns include an 8 A battery charger/solar regulator so normally an external charger is not needed
• The construction is a heavy duty steel construction with a hot dipped galvanized surface treatment

Application areas for this type of installation are smaller oil and gas platforms in remote areas, other small fixed offshore structures and SBM buoys.

SFD 7100 EX Fog Detector

SFD 7100EX is a fog detector designed for offshore marine applications. It operates on the principle that the led transmitter projects light toward the receiver. The amount of light received is calculated to a resulting signal strength. This is converted to a visible range.

• Range of visibility detection between 30 m to 16 km
• ATEX category Zone 1
• Extremely robust design
• Low power consumption, suitable for solar and battery operation
• Used on fixed offshore structures, oil/gas platforms, offshore wind farms, FSO and FPSO tankers
• Can be installed together with Fog signals
• Calibration Kit in a carry case on request

SBE 130 EX Battery Box

The battery box model SBE 130 EX is designed to operate under the most harsh offshore conditions. The robust battery box is constructed from stainless steel with a modular design.

• The standard battery box is equipped with a 130Ah VRLA battery
• Modular design approval gives the opportunity to offer bigger enclosures with bigger batteries
• The enclosure can also be offered with Nickel Cadmium battery
• ATEX category Zone 1 and Zone 2
• The battery box can be used on offshore platforms and on SBM buoys
• The battery box can be equipped with a main switch or with a circuit breaker

SFH 1 EX Fog Signal

SFH 1 EX Fog Signal is a 0,5 nm audio signal. The Fog Signal is a new development, compact and lightweight unit designed for marine applications. The Fog Signal is equipped with one compressor driver and with an integrated power Amplifiers.

• Signal range 0,5 nm
• Output 120,5 db at a frequency of 653 Hz
• Corrosion resistant aluminium housing
• Low power consumption, suitable for solar and battery operation
• Maintenance free design
• As standard delivered with Morse U 30 sek audio signal, on request other characters
• Used on fixed offshore structures, oil/ gas platforms, offshore wind farms, FSO and FPSO tankers
• Can be installed together with a fog detector

Navigational Light Stern

Product Details:

• Minimum Order Quantity- 01 Unit
• Usage- Ship
• Mobile Access- No
• Type- Wireless

Our company is engaged in offering the most preferred range of Navigational Light Stern. These Navigational Light 502 Stern systems are being designed and developed by using high grade basic materials, coupled with latest technology. We take into consideration the prevailing trends and standards of the industry and offer suitable range of Navigational Light 502 Stern.

Navigational Light 506 White Light

Navigational light 506 white light

Navigation Signal Light

Vessel navigation signal lights for operating in darkness as well as navigation marks also. Navigation lights are also helps in order to prevent collisions between two or more vessels.

LED Range Light

With the help of our expert professionals, we have been able to offer a wide range of LED Range Lights. The LS 100 LED signal offered by us are designed in compliance with the set industry standards and norms. These LS 100 LEDs cater to the varied requirements of short and medium range directional lights like range and port traffic signals. Moreover, these lights are designed using optimum quality to remain in tandem with set industry standards and norms.

High Intensity LED Range

The High Intensity LED Range Light Signal is designed for applications requiring medium and long range directional light, such as range lights and port traffic signals.

Single Navigation Light

For all sea going vessels with a length of 20 meters or more. According to international regulations for preventing collisions at sea.

Navigation Light Oceanic ( Single & Double Tier )

For all sea going vessels with a length of 20 meters or more. According to international regulations for preventing collisions at sea.

Masthead Starboard Lights

• For vessels up to 12m
• Visible distance: Port
• Starboard - Bicolor: 1nm Stern
• Masthead: 2nm
• 12/24V DC & 2W
• Vertical mounted
• Waterproof, non corrosion, non magnetic

Masthead Port light Lights

• For vessels up to 12m
• Visible distance: Port
• Starboard - Bicolor: 1nm Stern
• Masthead: 2nm
• 12/24V DC & 2W
• Vertical mounted
• Waterproof, non corrosion, non magnetic

Masthead Stern light Lights

• For vessels up to 12m
• Visible distance: Port
• Starboard - Bicolor: 1nm Stern
• Masthead: 2nm
• 12/24V DC & 2W
• Vertical mounted
• Waterproof, non corrosion, non magnetic

Masthead Masthead light Lights

• For vessels up to 12m
• Visible distance: Port
• Starboard - Bicolor: 1nm Stern
• Masthead: 2nm
• 12/24V DC & 2W
• Vertical mounted
• Waterproof, non corrosion, non magnetic

Masthead Bi-colour light Lights

• For vessels up to 12m
• Visible distance: Port
• Starboard - Bicolor: 1nm Stern
• Masthead: 2nm
• 12/24V DC & 2W
• Vertical mounted
• Waterproof, non corrosion, non magnetic

Warning Light with Horn

• Warning Light with Horn
• Having a variety of function by employing unique structure of built-in horn with high volume Max. 105dB in spite of its small size.
• Suitable for machinery of exclusive use, robotized production line and manless surveillance system
• Having built-in switch for steady/flashing selection
• RoHS compliant product is custom made
• Lens Color : R-Red, A-Amber, G-Green B-Blue
• Flashes : 60~80/min
• Material : Lens-AS, Body-ABS, Reflector-Heat Resistant ABS
• Protection Class : IP54
• Certificate : CE

Warning /Signal Light With Buzzer

Warning / signal Light with Buzzer (Stock Available)

• Bulb / steady flashing type of integrated prouct with built-in strong Buzzer
• Steady / flashinf Selection which is built-in the product.
• Material : Lens - AS, Body - ABS * Protection Class : IP54
• High brightness LED steady / flashing type
• Buzzer Volume : Max. 100db / m ( 2 Buzzer sound type is custom - made)
• Material : Lens - AS, Body - ABS * Protection class : IP54

Revolving Lights With Hooters

The Revolving Light With Hooters that we supply to clients spread across industry verticals is highly appreciated for precision engineering and dimensional accuracy. These flashing warning lights offer terrific solutions to different workplaces and on sea bound vessels. Our revolving flashing lights operate in many voltages and also specifications

Explosion Proof LED Revolving Warning Light-Standard size

• Bulb reflector revolving
• LED reflector revolving
• LED steady / flashing

High brightness LED reflector revolving warning light.
Explosion-proof class : KIMM, KOSHA, NEPSI - Exd IICT6, IP66
ATEX - II 2G Exd IIBT6, IP66

Explosion Proof LED Steady/Flashing Light-Small size

• Bulb reflector revolving
• LED reflector revolving
• LED steady / flashing

Economical explosion proof product of LED steady/flashing type
Having semi-permanent lifespan of light source and suitable for places where bulb replacement is difficult
Suitable for dangerous place where exists risk of explosion
Material : Filter-PC, Body-DIECAST Al, Reflector-Heat resisting ABS, Lens-Explosion-proof tempered glass, Protection cage-SUS316L
Certificate : KIMM, ATEX
Explosion-proof class : KIMM - Exd IICT6, IP66
ATEX - 2G Exd IIBT6, IP66
Ratings : 12VDC, 24VDC, 230VAC

Explosion Proof Light With Siren Buzzer

SERIES LENS Ø100mm, Siren buzzer 110Db

• Explosion-proof cable grand is custom-made.
• Power entry standard : NPT 1/2
• Explosion-proof product with warning light and siren buzzer integrated
• Employing aluminium housing with high durability and high anti-corrosion
• Suitable for warning at places having the risk of inflammatory explosion like petrochemical plants, crude oil carriers and chemical factories
• Lens color : -R -A -G -B
• Standard body color : MUNSELL NO. 7.5BG 7/2
• Material : Filter-PC, Body-DIECAST Al, Lens- Hardened explosion proof glass, Protection cage- SUS316L
• Volume: Max.110dB/m
• Certificate : KIMM, ATEX
• Protection class : KIMM-Exd ll CT6, IP66, Possible to install outdoor
• ATEX - 2G Exd IIBT6, IP66
• Ambient temperature range : -40Tamb≤+60

LED 155 EX LED Lantern

LED 155 EX is a LED lantern commonly used on offshore platforms. The lantern is maintenance free, compact and robust in design. LED 155 EX is modular and can be delivered with up to 3 tiers.Range up to 8 nm atTc = 0.74 (12 at Tc = 0.85)

• ATEX category Zone 1 and Zone 2
• Standard IALA colours Red, Green,White and Yellow
• Rugged aluminium housing
• Extremely low power consumption, suitable for solar and battery operation
• Integrated flasher with a day light switch and an 8 Ampere solar panel charger
• Adjustable intensity and range
• Available with narrow (6°) or wide (10°) vertical divergence
• Programming with Sabik Mk2E portable programmer
• Cable synchronization between light units

Warning Light With Bell

We bring forth an impregnable range of Explosion Proof Warning Light with Bell. The Explosion-proof product with warning light and bell is integrated employing aluminum housing with high durability and high anti-corrosion installed protection cage (option) for preventing globe from outside, Impacting, Suitable for warning at places having the risk of inflammatory Explosion like petrochemical plants, crude oil carriers and chemical Factories.

Specifications:

• Lens color: -r -a -g -b
• Standard body color: munsell no. 7. 5bg 7/2
• Bell housing standard color: red
• Material: filter-PC, body-diecast al, bell housing-al lens
• Hardened explosion proof glass, protection cage-sus316l
• Certificate: kosha, kr, kimm, abs
• Protection class: exd Ct6, ip55, possible to install outdoor

Heavy Duty Double Face Siren With Green LED Light

SERIES LENS Ø125mm, Siren 113-118dB x 2

• Self-standing product of integrated structure(warning light with 2 faces phone)
• Employing aluminum housing with high durability and high anti corrosion
• Possible to select sound tone and control volume by using built-in sound tone switch and volume controller
• Possible to be equipped with protection cage(option) that keeps the lens from being touched from outside
• Suitable for cranes, vessel machines, steel industry sites and outdoor plants
• Lens color : R A G B
• Material : Lens-PC, Body-Diecast Al, Horn housing-PC
• Certificate : KIMM, ABS

Explosion Proof LED Perimeter Light

Banking on our enriched industry experience, we are engaged in offering a huge gamut of Explosion Proof LED Perimeter Light - 125mm. We take into consideration the variegated needs and demands of our clients and offer the most suitable range of explosion proof warning light with LED perimeter light. This high grade explosion proof warning light with LED perimeter light is renowned for their advanced features and cost effectiveness.

Explosion Proof Warning Light With Siren

• Bulb reflector revolving
  LED reflector revolving
  LED steady/flashing
• Explosion-proof product with LED revolving warning light and horn integrated
• Al housing product of long durability and anti-corrosion
• Equipped with protection cage to protect lens from external contact or damage.
• Suitable for a place where exists the risk of explosion such as petrochemical plant, powder plant, gas equipments etc.
• Possible to select sound tone and control volume by using built-in sound tone selection switch and volume controller.
• Lens Color : R-Red, A-Amber, G-Green, B-Blue
• Revolving Speed : 120~140RPM(Controllerable)
• Standard body Color : MUNSELL NO : 7.5 BG 7/2
• Standard Horn Housing Color : Red
• Material : Lens-Explosion Proof Tempered Glass, Body-DIECAST Al Lens Filter & Reflector--PC, Protection Cage-SUS, Horn Housing-SUS316L
• Certificate : KOSHA, KR, KIMM, ABS
• Explosion-Proof Protection Class : Ex d C T6, IP66
• Volume : MAX.118dB/m

Explosion-Proof Electronic Siren

• Possible to control volume level by using the built-in volume Controller
• Having 5 built-in special warning sounds for vessel
• Body standard color : MUNSELL NO. 7.5BG 7/2
• Horn housing standard color : RED
• Material : Body-DIECAST Al, Horn housing-SUS316L
• Certificate : KOSHA, KR, KIMM, ABS, ATEX, NEPSI
• Protection class : KIMM, NEPSI, KR - Exd IICT6, IP66
• ATEX - 2G Exd IIBT6, IP66
• KOSHA - Exd IIB +H2

Explosion-Proof Signal Lights

Our company is highly acclaimed in offering a wide range of Explosion-Proof Signal Lights. These Small Size, Explosion-Proof Warning / Signal Lights offered by us are renowned for economical explosion proof product of LED reflector revolving type. Our Small Size, Explosion-Proof Warning / Signal Lights are offered with a small and light product of aluminum housing, which has excellent durability and anti-corrosion properties

Search & Rescue Transponder

We bring forth an impregnable range of SART (Search and Rescue Transponder).

The device operate in the 9 ghz marine radar band designed for application in search and rescue (sar) operations. This system offers most accurate services with almost zero rate of misinformation. Our products are highly sensitive to sound and vibration, durable and resistant decays for a long haul time

Emergency Position Indicating Radio Beacon

Our company is highly acclaimed in offering a wide range of EPIRB (Emergency Position Indicating Radio Beacon). This system is a satellite distress beacon designed for operation in conjunction with small and lightweight, a slim line fully enclosed float free housing. The entire range is fitted with a global distress alerting and satellite location. The high grade EPIRB offered by us is appreciated for its unique features such as reliability, cost effectiveness and is very easy to use and maintain

AIS Tracking System

AIS is the mariner's most significant development in navigation safety since the introduction of radar. The system was originally developed as a collision avoidance tool to enable commercial vessels to ‘see' each other more clearly in all conditions and improve the helmsman's information about his surrounding environment. AIS does this by continuously transmitting a vessels identity, position, speed and course, along with other relevant information to all other AIS equipped vessels within range. Combined with a shore station, this system also offers port authorities and maritime safety bodies the ability to manage maritime traffic and reduce the hazards of marine navigation.

Liferafts

Liferafts are a critical life saving appliance. In times of distress, it is the liferaft that transports people ashore to safety.

F.R.P Rigid Rescue Boat

Rescue boat is made from fiber reinforced plastic (FRP), between its inner hull and outer hull is filled with polyurethane foams to offer sufficient buoyancy.If damages occur to the boat body under water, the buoyant hull can still provide sufficient buoyancy to enable the boat to sail safety on the water surface.

PVC Hypalon Inflatable Rib Rubber Boat

Standard Accessories:

Two oars, a foot pump, a repair kit, bench with cushion. Optional Accessories:

Boat Trailer, boat cover, canopy, thwart, anchor, life jacket, aluminum seat, soft ladder, console, etc.

Twist Lock & Container Lock

Fully automatic Twistlock- Placed between containers in a stack and slots into corner castings.

Semi-automatic Twistlock-Placed between containers in a stack and slots into corner castings

Container Lashing Bar & Extension Hooks

Lashing bars are used on the ends of the containers while aboard ship to securing the container stacks to the ship. Short bars of about 2500 mm go to the bottom of the 2nd container tier. Long bars of about 4500 to 5000 mm go to the bottom of the 3rd container tier. The bars have a swivel head on one end the can fit into the end of the container corner casting. The other end is to be used in conjunction with the appropriate turnbuckle which in turn is secured to a d ring or lashing plate which is welded to the ships deck.

Container D Rings

Cargo securing d-rings. Alternative tie down point for a turnbuckle.

Container Stacking Cones

Used below the hatch cover between containers.Non locking. Hanging.

Marine Generator Sets

Environmentally-friendly engines powered by natural gas maximize customer profits with great economic feasibility. They are categorized into engines for thermal-integrated power generators and engines for general power generators. Doosan Infracore manufactures engines characterized by a diverse power range.

• 30 KVA To 625 KVA
• Both 50 Hz & 60Hz